Sorry but its me again !!

Networking and broadband talkabout. Need help with that new router or setting up a network?
Post Reply
beaky
Goober Member
Posts: 17
Joined: Mon Aug 29, 2005 6:33 am

Sorry but its me again !!

Post by beaky »

Ok

My mate has a cable modem and I am trying to use a belkin router.

It is an NTL cable modem and I cannot get the damn think to work with the ethernet cable.

This is a xmas present so any swift replies would be appreciated.

No ethernet light witht the modem connected by ethernet cable

Help
!!!!

Regards

Beaky
User avatar
impuresoul2k3
Senior Member
Posts: 381
Joined: Wed Jun 30, 2004 4:11 pm
Location: Nebraska

Post by impuresoul2k3 »

Are you using a "cross over" ethernet cable, or are you using a "straight through" cable?
Athlon 3500+
1.5gb PC4200 Ram
nVidia 7600GS
DVD+-R/RW Dual Layer
Segate 160gb HD
Sweet 15" CRT!

Heat
beaky
Goober Member
Posts: 17
Joined: Mon Aug 29, 2005 6:33 am

Post by beaky »

Its a straight through ethernet cable

Any ideas ??

Cheers

Beaks
User avatar
eGoCeNTRoNiX
Posts: 7362
Joined: Wed Oct 23, 2002 12:51 pm
Location: HELL

Post by eGoCeNTRoNiX »

Have you tried a different cable?
PM before Email People!!
Image
Heat Under eGoCeNTRoNiX :)
Who Farted? BEANIE!!!
!Welcome to the United States of the Offended!
User avatar
impuresoul2k3
Senior Member
Posts: 381
Joined: Wed Jun 30, 2004 4:11 pm
Location: Nebraska

Post by impuresoul2k3 »

Or maybe try a different card
Athlon 3500+
1.5gb PC4200 Ram
nVidia 7600GS
DVD+-R/RW Dual Layer
Segate 160gb HD
Sweet 15" CRT!

Heat
beaky
Goober Member
Posts: 17
Joined: Mon Aug 29, 2005 6:33 am

Post by beaky »

Yes
I Have tried a different cable.
I have the modem connected to the modem port in the router,the router connected to the computer all by ethernet cable.
The belkin installation disk goes right up to the end and cannot find the modem.The ethernet light will not come on on the modem or the router.But the cable modem works fine by usb
Getting close to xmas now and we are a bit concerned.
All help is appreciated
Thanks
Beaks
User avatar
eGoCeNTRoNiX
Posts: 7362
Joined: Wed Oct 23, 2002 12:51 pm
Location: HELL

Post by eGoCeNTRoNiX »

I had this problem at one time, but it was the NIC in the computer that wasn't enabled or connecting to the router.. So a little different.. Not sure where the error could be, hope you find it! :)

eGo
PM before Email People!!
Image
Heat Under eGoCeNTRoNiX :)
Who Farted? BEANIE!!!
!Welcome to the United States of the Offended!
beaky
Goober Member
Posts: 17
Joined: Mon Aug 29, 2005 6:33 am

Post by beaky »

Help me out here

What is an NIC and how do I enable it ?

Windows XP,Belkin router and NTHell modem

Cheers
User avatar
eGoCeNTRoNiX
Posts: 7362
Joined: Wed Oct 23, 2002 12:51 pm
Location: HELL

Post by eGoCeNTRoNiX »

NIC = Network Interface Card.. The card that your ethernet cable hooks up to on the computer. If not properly enabled, the software will not see the router and give you problems. GL

eGo
PM before Email People!!
Image
Heat Under eGoCeNTRoNiX :)
Who Farted? BEANIE!!!
!Welcome to the United States of the Offended!
Post Reply