Discussions and help regarding overclocking, motherboards, peripherals, AMD and INTEL CPU's
iam4u2nv
Posts: 40 Joined: Thu Jan 11, 2001 8:50 am
Post
by iam4u2nv » Fri Jun 28, 2002 8:44 am
Quick question
can I run pc133 in a DDR system board?
Thanks
iam4u2nv
Posts: 40 Joined: Thu Jan 11, 2001 8:50 am
Post
by iam4u2nv » Fri Jun 28, 2002 8:46 am
By the way. This is Scott
What's up all?
Hope all is well.
NascarFool
Posts: 3263 Joined: Thu Nov 23, 2000 1:21 pm
Post
by NascarFool » Fri Jun 28, 2002 10:53 am
Some of the Early boards had slots for DDR and slots for SDR. Anymore, the DDR boards will only use DDR memory. An Asus A7A266 can use DDR or SDR. I know there are a few other older boards that can use wither kind too.
Sean
Posts: 2360 Joined: Wed Jul 25, 2001 7:33 pm
Location: Rapid City, SD
Contact:
Post
by Sean » Fri Jun 28, 2002 1:24 pm
However, on those boards, both kinds could NOT be used at the same time. Either SDR or DDR, not both.
- Sean
NascarFool
Posts: 3263 Joined: Thu Nov 23, 2000 1:21 pm
Post
by NascarFool » Fri Jun 28, 2002 3:19 pm
I knew I forgot something. I have heard of people trying both at the same time, not a pretty sight.
VidmanII
Posts: 2465 Joined: Wed Nov 22, 2000 9:54 pm
Location: Egg Harbor, NJ
Post
by VidmanII » Sat Jun 29, 2002 9:17 am
Hey Scott !! Nice to see u back !!
AMD Ph II X4 955 BE 3.2 @ 3.8 GHz | Scythe SCSMZ-2000 | ASRock 880GMH/USB3 | 8 GB G.Skill DDR3 1600 | Radeon HD5670 | Kingston 128GB SSD