ABS idiot light problems

This car is systematic, hyyydromatic...why it's greased lightning!
Post Reply
User avatar
renovation
Posts: 13859
Joined: Wed Nov 22, 2000 8:24 am
Location: on a lake in michigan
Contact:

ABS idiot light problems

Post by renovation »

to start light came on code showed rear driver side sensor was defective - $55 for the part from auto parts . new pads all around plus 2 rear rotors and alls good I thought. a couple days later light come back on again .this time no codes given. so the wifes 2008 vue is at the dealership today.drop it off at 8 AM today and waiting to hear whats going on. car has only 42,000 miles on it. last time I took it in for a minor repair it turned into a 3 day a fair with us getting a free rental and the dealership dropping the trans/motor out to replace some seals they found leaking.
kind of lie and said hearing a rumble in the front wheels .hoping to have the front bearing replaced so it be covered under warranty. not really lying I do hear a noise from the front rotors. but that was because i didn't turn the front rotors when i did the front brakes a month ago and theres a bit of a rust lip build up.
keeping fingers crossed its not going to cost us a ton. i understand there is a problem with the ABS brake wiring harness getting shorted due to rubbing on the frame and grounding out. sweating a bit right now hoping its not a big repair bill.
the Last time I was Talking to myself . I got into such a heated argument . that is why I swore I never talk to that guy again. you know what it worked now no buddy talking to me. :help
User avatar
renovation
Posts: 13859
Joined: Wed Nov 22, 2000 8:24 am
Location: on a lake in michigan
Contact:

Post by renovation »

just got the call $185 abs harness in the front is all frayed and needs a wheel bearing up front to . be done before noon tomorrow !
the Last time I was Talking to myself . I got into such a heated argument . that is why I swore I never talk to that guy again. you know what it worked now no buddy talking to me. :help
User avatar
wvjohn
Posts: 9238
Joined: Wed Nov 22, 2000 7:09 am
Contact:

Post by wvjohn »

I had mine in for warranty work - they replaced starter motor and then told me the reason that the tire pressure light stayed on was because the spare only had 19 psi....as in the spare that is stuck to the rear door of my Rav4 - who woulda thought that was monitored?
<a href="http://www.heatware.com/eval.php?id=123" target="_blank" >Heatware</a>
User avatar
Executioner
Life Member
Posts: 10354
Joined: Wed Nov 22, 2000 11:34 am
Location: Woodland, CA USA

Post by Executioner »

wvjohn wrote:I had mine in for warranty work - they replaced starter motor and then told me the reason that the tire pressure light stayed on was because the spare only had 19 psi....as in the spare that is stuck to the rear door of my Rav4 - who woulda thought that was monitored?
Pretty soon you'll be monitored.
User avatar
eGoCeNTRoNiX
Posts: 7362
Joined: Wed Oct 23, 2002 12:51 pm
Location: HELL

Post by eGoCeNTRoNiX »

wvjohn wrote:I had mine in for warranty work - they replaced starter motor and then told me the reason that the tire pressure light stayed on was because the spare only had 19 psi....as in the spare that is stuck to the rear door of my Rav4 - who woulda thought that was monitored?
If it's a real full size spare on the same rim that the rest of the tires are on, it should/would have the TPMS installed.. Funny huh? lol
PM before Email People!!
Image
Heat Under eGoCeNTRoNiX :)
Who Farted? BEANIE!!!
!Welcome to the United States of the Offended!
User avatar
renovation
Posts: 13859
Joined: Wed Nov 22, 2000 8:24 am
Location: on a lake in michigan
Contact:

Post by renovation »

final cost $150 - there was like 1 ft or less of wire corroded the lf wheel bearing hub and ABS senser replaced. guess they had to do the hub twice as one bearing they installed was defective right out of the carton. (normal for my luck )reason i beleave this is my friend is the heavy tech for the shop .but he's not the one that worked on my car this trip in there.
also had to pound a heavy build up of rust off the driver side rotor .this I was aware of before I brought it in for repairs.all seems well now ! did find out the DBSC scans you buy online or in a auto parts are only able to read basic codes. (im sure the Snap On units would do better )there were 3 on my car that the unit I used didn't pick up at all before I took it to the dealer for service.
the Last time I was Talking to myself . I got into such a heated argument . that is why I swore I never talk to that guy again. you know what it worked now no buddy talking to me. :help
Post Reply