Hell with HP N3410

Laptops, Notebooks, PDA's, MP3 Players, Cell Phones
Post Reply
User avatar
GuardianAsher
Golden Member
Posts: 1102
Joined: Mon Aug 01, 2005 12:30 am
Location: Lubbock, TX

Hell with HP N3410

Post by GuardianAsher »

Let me make this short. HP N3410. AMD K6-2 550 MHz. 160 Mb RAM, 8 Mb dedicated to video.
Press the power button. Boots into Windows XP, SP1. Gets to the logon screen. I put my password in, it begins to load. Shows the desktop for 5 seconds, then reboots. Safe mode does the same thing. It's not the battery, since I have it plugged in at the time. Any suggestions?
User avatar
eGoCeNTRoNiX
Posts: 7362
Joined: Wed Oct 23, 2002 12:51 pm
Location: HELL

Post by eGoCeNTRoNiX »

May very well be the memory...
PM before Email People!!
Image
Heat Under eGoCeNTRoNiX :)
Who Farted? BEANIE!!!
!Welcome to the United States of the Offended!
User avatar
swinada
Golden Member
Posts: 642
Joined: Mon Jan 13, 2003 7:40 pm
Location: BC
Contact:

Post by swinada »

my guess would also be memory, make sure memory is seated properly, if you have the option try a different stick. If you have more then one installed, boot only with one then switch around. See if problem persists.

You sure your AC is working? Will it boot with the batterie removed?

Unplug network cable before rebooting.
All the best from the west!



Image
User avatar
FlyingPenguin
Flightless Bird
Posts: 33161
Joined: Wed Nov 22, 2000 11:13 am
Location: Central Florida
Contact:

Post by FlyingPenguin »

I don't think it has anything to do with hardware. It's an OS issue. RAM problems don't generally cause reboots - and not at the same place in the boot process.

There's a registry corruption issue that will cause this. You might try using this technique to manually reset your registry, then go into safe mode to use system restore: http://support.microsoft.com/kb/307545

Hope this helps...
---
“The Government of Spain will not applaud those who set the world on fire just because they show up with a bucket.” - Prime Minister of Spain, Pedro Sánchez

Image
User avatar
rndmtask
Senior Member
Posts: 429
Joined: Mon Feb 23, 2004 10:50 pm

Post by rndmtask »

Well you could rule out memory quickly with memtest86. It also gives the processor a fair amount of work but won't catch all problems a processor could have.
Post Reply