Different speed test....
- FlyingPenguin
- Flightless Bird
- Posts: 33161
- Joined: Wed Nov 22, 2000 11:13 am
- Location: Central Florida
- Contact:
david your upload is awesome for comcast
i hit 5.5 down, but only 489k up
i hit 5.5 down, but only 489k up
[align=center]<img src="http://www.statgfx.com/statgfx/folding/?&username=Billygoat(pcabusers)&border=0,255,0&label=255,0,0&header=0,0,255&stats=0,0,0&bgcolor=255,255,0&trans=no&template=fah_original&.jpg" alt="PCA Folding Rules!" />[/align]
- renovation
- Posts: 13859
- Joined: Wed Nov 22, 2000 8:24 am
- Location: on a lake in michigan
- Contact:
- impuresoul2k3
- Senior Member
- Posts: 381
- Joined: Wed Jun 30, 2004 4:11 pm
- Location: Nebraska
Alright guys, I did the speed test and my download was a measly 333kps. Understandable since my card will only connect at 10mpbs full duplex, but my QoS is 31%. When I ran the network cable I ran it through the holes already occupied by electricity lines in the floor joists and then up to my room. Would this cause a lot of interference or do you think maybe I have a bad cable or clip on it?
Athlon 3500+
1.5gb PC4200 Ram
nVidia 7600GS
DVD+-R/RW Dual Layer
Segate 160gb HD
Sweet 15" CRT!
Heat
1.5gb PC4200 Ram
nVidia 7600GS
DVD+-R/RW Dual Layer
Segate 160gb HD
Sweet 15" CRT!
Heat
4.21 down 449 up on comcast delaware - through a wireless connection
seems to be faster since I moved the big metal toolbox that was sitting next to the wireless router (doh
)
impure - go to http://www.broadbandreports.com and run their diagnostics and see if you have the rwin and all that stuff set right - the fact that your nic is only 10 shouldn't make a difference
seems to be faster since I moved the big metal toolbox that was sitting next to the wireless router (doh
impure - go to http://www.broadbandreports.com and run their diagnostics and see if you have the rwin and all that stuff set right - the fact that your nic is only 10 shouldn't make a difference
<a href="http://www.heatware.com/eval.php?id=123" target="_blank" >Heatware</a>
- impuresoul2k3
- Senior Member
- Posts: 381
- Joined: Wed Jun 30, 2004 4:11 pm
- Location: Nebraska
Alright my RWIN 17520 it says it needs to be between 48180 and 125560. Anybody know a good number to use, or is it just guess and check?
Athlon 3500+
1.5gb PC4200 Ram
nVidia 7600GS
DVD+-R/RW Dual Layer
Segate 160gb HD
Sweet 15" CRT!
Heat
1.5gb PC4200 Ram
nVidia 7600GS
DVD+-R/RW Dual Layer
Segate 160gb HD
Sweet 15" CRT!
Heat
- impuresoul2k3
- Senior Member
- Posts: 381
- Joined: Wed Jun 30, 2004 4:11 pm
- Location: Nebraska
I checked my speed one day because it seemed like internet was going fast and I was hitting 4mbps consistantly. Then I found I was running on half-duplex so I went to full and that dropped my speed down to 300KBps. Any reason why, or just bad card?
Athlon 3500+
1.5gb PC4200 Ram
nVidia 7600GS
DVD+-R/RW Dual Layer
Segate 160gb HD
Sweet 15" CRT!
Heat
1.5gb PC4200 Ram
nVidia 7600GS
DVD+-R/RW Dual Layer
Segate 160gb HD
Sweet 15" CRT!
Heat



