I remember when 32 mb seemed like alot but I'm sure many here can "beat" that
Memory with a 64 bit cpu? Any need for more than 1gb?
- EvilHorace
- Life Member
- Posts: 6611
- Joined: Wed Nov 22, 2000 7:14 am
- Location: Greenfield, WI
Memory with a 64 bit cpu? Any need for more than 1gb?
The new 64 bit mobo can handle up to 4 gb of memory and I've got 1 ghz now which I'd think should be plenty. WHY would anyone then NEED 4 gb, for what?
I remember when 32 mb seemed like alot but I'm sure many here can "beat" that
I remember when 32 mb seemed like alot but I'm sure many here can "beat" that
<img src="http://www.pcabusers.org/images/evil2.gif">
what are you doing, I would imagine at this point anything over 1,5 gigs and your gains are not going to be as expodential
[align=center]<img src="http://www.statgfx.com/statgfx/folding/?&username=Billygoat(pcabusers)&border=0,255,0&label=255,0,0&header=0,0,255&stats=0,0,0&bgcolor=255,255,0&trans=no&template=fah_original&.jpg" alt="PCA Folding Rules!" />[/align]
There have been a number of Pentium 4/Xeon and Athlon/MP boards which could accept 4 GB of RAM, 64-bitness not needed. However, only 3.5 to 3.8 GB of that would have been usable since PCI card ROMs have to be mapped in the address space, and the "missing" RAM was due to that.
64-bit processors can "theoretically" handle more than 4 GB of RAM, but that's not always the case. Single-channel Athlon 64s can usually only handle up to 3 GB, and that at reduced speed (PC2100.) The memory controller simply can't handle that much load on the bus without buffering. Remember that physical memory support is not the same as total address space.
Opterons can handle 4-8 GB thanks to their 128-bit controllers and registered DIMMs. Opteron boards with multiple CPUs can really pile on the RAM since each CPU has its own memory controller.
64-bit processors can "theoretically" handle more than 4 GB of RAM, but that's not always the case. Single-channel Athlon 64s can usually only handle up to 3 GB, and that at reduced speed (PC2100.) The memory controller simply can't handle that much load on the bus without buffering. Remember that physical memory support is not the same as total address space.
Opterons can handle 4-8 GB thanks to their 128-bit controllers and registered DIMMs. Opteron boards with multiple CPUs can really pile on the RAM since each CPU has its own memory controller.
- EvilHorace
- Life Member
- Posts: 6611
- Joined: Wed Nov 22, 2000 7:14 am
- Location: Greenfield, WI
- FlyingPenguin
- Flightless Bird
- Posts: 33162
- Joined: Wed Nov 22, 2000 11:13 am
- Location: Central Florida
- Contact:
- EvilHorace
- Life Member
- Posts: 6611
- Joined: Wed Nov 22, 2000 7:14 am
- Location: Greenfield, WI
...........typo (edited)
I was browsing at some other forum and read where some guy was mentioning that he just liked having 4 gigs of memory in his PC. Don't think he had a good reason besides bragging rights but made me wonder why anyone might need that.
I was browsing at some other forum and read where some guy was mentioning that he just liked having 4 gigs of memory in his PC. Don't think he had a good reason besides bragging rights but made me wonder why anyone might need that.
<img src="http://www.pcabusers.org/images/evil2.gif">
waste of money, i know a guy that has 4 gigs of ram in his p4 gaming rig and wonders why my mobile athlon loads maps faster then him 
[align=center]<img src="http://www.statgfx.com/statgfx/folding/?&username=Billygoat(pcabusers)&border=0,255,0&label=255,0,0&header=0,0,255&stats=0,0,0&bgcolor=255,255,0&trans=no&template=fah_original&.jpg" alt="PCA Folding Rules!" />[/align]
