I have an AMD Athlon XP 2200+. I can overclock it to 13x-149fsb, I can't get it to go to 150 or above. My bios says my memory has to run at at least 333mhz which is does(pc2700). Can this chip just not go that fast or is there some setting Im missing?
BTW:
Motherboard-Asus a7v333
RAM-Hynix PC2700 256mb CL 2.5
Amd 2200+
- impuresoul2k3
- Senior Member
- Posts: 381
- Joined: Wed Jun 30, 2004 4:11 pm
- Location: Nebraska
- eGoCeNTRoNiX
- Posts: 7362
- Joined: Wed Oct 23, 2002 12:51 pm
- Location: HELL
- impuresoul2k3
- Senior Member
- Posts: 381
- Joined: Wed Jun 30, 2004 4:11 pm
- Location: Nebraska
- impuresoul2k3
- Senior Member
- Posts: 381
- Joined: Wed Jun 30, 2004 4:11 pm
- Location: Nebraska
pc2700 runs "optimal" at 166, doubling to 333, the cpu is built to run at 133 fsb.
normally, your fsb would likely be 133 + 33 and ram would be 166 so you are slightly overclocked.
bios is adding the 33mhz to sync the chip with the ram. i have a board that does this as well. i have not really messed with the bios in it yet, but i believe if you can change the setting(it differs, but is something like) fsb/dram or cpu/dram parameters that is default setting of "optimal" to something else like "turbo" or "expert" then you have more options to specify each speed individually.
however, like ego said, if your multi is locked at 13 then you are gonna be limited on what you can do with the chip
normally, your fsb would likely be 133 + 33 and ram would be 166 so you are slightly overclocked.
bios is adding the 33mhz to sync the chip with the ram. i have a board that does this as well. i have not really messed with the bios in it yet, but i believe if you can change the setting(it differs, but is something like) fsb/dram or cpu/dram parameters that is default setting of "optimal" to something else like "turbo" or "expert" then you have more options to specify each speed individually.
however, like ego said, if your multi is locked at 13 then you are gonna be limited on what you can do with the chip
- impuresoul2k3
- Senior Member
- Posts: 381
- Joined: Wed Jun 30, 2004 4:11 pm
- Location: Nebraska