its a p3 system hp to be out right .
i loaded windows xp with service pack 2 on it,
it fires right up when i plug it in at my house all is fine
when i take it up to the store were its going to be used at .
all i get is the hp screen and stops loading .
i talking the screen just sits there at the store .
i have taken it home twice now and it go's right to windows like it supposed to .
i have change plug locations at the store thinking its a low amp problem -and different circuits .
any ideas im at a total loss here .
system stops loading at one location . but fire right up when i get it home
- renovation
- Posts: 13859
- Joined: Wed Nov 22, 2000 8:24 am
- Location: on a lake in michigan
- Contact:
system stops loading at one location . but fire right up when i get it home
the Last time I was Talking to myself . I got into such a heated argument . that is why I swore I never talk to that guy again. you know what it worked now no buddy talking to me. 

- FlyingPenguin
- Flightless Bird
- Posts: 33162
- Joined: Wed Nov 22, 2000 11:13 am
- Location: Central Florida
- Contact:
Pretty bizarre. This happens with nothing but the keyboard, monitor, and mouse connected to it? Don't connect anything else to it.
Some suggestions:
POWER PROBLEM: The store perhaps has slightly lower/higher voltage than home, and the PSU in the computer is flaky and not dealing with it.
MONITOR: I assume you're using a different monitor at both locations? Maybe the store monitor has a voltage leak or ground loop down one of the pins and making the computer crash. Along those lines make sure the computer and EVERYTHING plugged into it is on the same double outlet and not using seperate outlets. I've seen ground loops between 2 different outlets of as much as 20 volts - enough to cause major problems. Ideally everything should be on one power strip connected to one outlet.
KEYBOARD: Is it a different keyboard at the store? Could be there's a problem with it.
Some suggestions:
POWER PROBLEM: The store perhaps has slightly lower/higher voltage than home, and the PSU in the computer is flaky and not dealing with it.
MONITOR: I assume you're using a different monitor at both locations? Maybe the store monitor has a voltage leak or ground loop down one of the pins and making the computer crash. Along those lines make sure the computer and EVERYTHING plugged into it is on the same double outlet and not using seperate outlets. I've seen ground loops between 2 different outlets of as much as 20 volts - enough to cause major problems. Ideally everything should be on one power strip connected to one outlet.
KEYBOARD: Is it a different keyboard at the store? Could be there's a problem with it.
---
“The Government of Spain will not applaud those who set the world on fire just because they show up with a bucket.” - Prime Minister of Spain, Pedro Sánchez

“The Government of Spain will not applaud those who set the world on fire just because they show up with a bucket.” - Prime Minister of Spain, Pedro Sánchez

- renovation
- Posts: 13859
- Joined: Wed Nov 22, 2000 8:24 am
- Location: on a lake in michigan
- Contact:
KEYBOARD: Is it a different keyboard at the store? Could be there's a problem with it.
im testing that first thing tomorrow i did think of that tonight -thanks fp ! i will let you know !
im testing that first thing tomorrow i did think of that tonight -thanks fp ! i will let you know !
the Last time I was Talking to myself . I got into such a heated argument . that is why I swore I never talk to that guy again. you know what it worked now no buddy talking to me. 

- renovation
- Posts: 13859
- Joined: Wed Nov 22, 2000 8:24 am
- Location: on a lake in michigan
- Contact: