Real Quick Mobo Q??

buddhazen · Post by **buddhazen** » Fri Jun 25, 2004 8:52 pm

hi im about to swap mobos
im goin from an asus a7n8x-e to an abit nf-7s

would i need to reinstall windows and reformat, or could i just swap the hdd out and plug it right in since they both run on the same chipset?

any advice appreciated

Busby · Post by **Busby** » Fri Jun 25, 2004 9:02 pm

Most likely you can just swap. Worst case is a repair install and then reinstall any hotfixes or service packs.

buddhazen · Post by **buddhazen** » Fri Jun 25, 2004 9:13 pm

thanks for the quick reply bubsy

only one way to find out
im diving in now

how bout that Will Bynum?, man hes awesome for g tech!

Busby · Post by **Busby** » Fri Jun 25, 2004 9:46 pm

A good transfer....I think most of us here are glad that OSU had no money left or else it woulda been him sinking the winning basket against us instead of vice versa. Watch out for the Jackets next year! Returning 4 of the starting 5 and still have most if not all of our depth (lost one big depth guy in Moore). UConn won't be able to handle us without Gordon and Okafor

buddhazen · Post by **buddhazen** » Sat Jun 26, 2004 11:50 am

so true bubsy
uconn aint got nada this year!!
ill be watchin for em next year, since they are a killa team

i am however runnin into a bit of a problem

it keeps tryin to install a primary and secondary ide channel after i reboot
games and benchmarks run fine though?
guess a reinstall is long due for this hdd

and another thing i might like to mention...
i thought this old school barton of mine was gonna get a crazy oc with a newer mobo, still stuck at 2.3 ghz

ram does 220 fsb at 2,2,2,5 at 2.9v
memtest stable overnight

guess this hyper x 3000 is bh-5 aft er all?

Busby · Post by **Busby** » Sat Jun 26, 2004 12:03 pm

Did you rerun the nVidia UDP driver install? That may fix your problem.

buddhazen · Post by **buddhazen** » Sat Jun 26, 2004 9:06 pm

sorry for the late reply
just got back from work

all i remember them asking me to install was a nvidia sw driver and i responded no!

im gonna have another look at it again

buddhazen · Post by **buddhazen** » Sun Jun 27, 2004 10:57 pm

ok everytime i try to play a video file it freezes??
doesnt matter what program i use...this is off a clean windows install i might like to add.

are there any jumpers on the mobo i should switch?

i didnt touch a single jumper and this a brand new retail nf7-s!
i currently have it set to 200x11 at 1.75 volts
temps in the 40's

any input appreciated

eGoCeNTRoNiX · Post by **eGoCeNTRoNiX** » Sun Jun 27, 2004 11:08 pm

Maybe? Or, you may need to drop your FSB a little.. What speed is your memmory?

buddhazen · Post by **buddhazen** » Mon Jun 28, 2004 2:21 am

i have hyperx 3200 in this machine now
i switched the hyper x 3000 to another machine and it works in the other nf7 board?
i dropped the fsb to 166 with laxed timings and it still freezes the system when i play a video!
this is frustrating

i think im just gonna put everything back in the asus board

PCA Forums

Real Quick Mobo Q??

Real Quick Mobo Q??

Codecs...