Help !!!!

NOL1M1TMAN · Post by **NOL1M1TMAN** » Mon Nov 17, 2003 3:25 am

I have a MSI K7N2 ILSR mobo with a 1700+ AMD Trbed B, 2 x 256 pc2700 kingston ram, 60 gb hard drive , gforce4 ti4200, I was in the bios trying to get my OC stable, I rebooted and I can't get no video signal and its not making beeping sounds like its posting either. I Cleared the CMOS 10-15 times even went as far as to remove the cmos battery for 30 mins no luck.

Any help would be appreciated ... I have a 400 watt turbolink psu btw.

blackhawk · Post by **blackhawk** » Mon Nov 17, 2003 6:13 am

First check the basics, psu switch and plug plus the case/mb power connector wire and mb/psu connection then reseat your video card, memory(drop to one stick if you have more) and remove and replace the cpu/hs.

These problems are frustrating so best to go away, relax and get some sleep and then come back fresh and start over.

Post by **FlyingPenguin** » Mon Nov 17, 2003 7:51 am

Unplug the PSU plug to the mobo, then reconnect. Sometimes this will reset the mobo.

Check your manual - sometimes there's a key combination you use during bootup the forces the mobo back to it's safe default settings.

wvjohn · Post by **wvjohn** » Mon Nov 17, 2003 8:19 am

I've had boards where i had to uplug the power source as well, when i get that far I usually chant and burn a little incense as well

- need to placate the puter godz

NOL1M1TMAN · Post by **NOL1M1TMAN** » Mon Nov 17, 2003 2:35 pm

i even tried a new psu, i forgot to add my D Led Bracket tells me its a CPU problem ...