Asus A7N8X Deluxe Q and a

Discussions about anything Computer Hardware Related. Overclocking, underclocking and talk about the latest or even the oldest technology. PCA Reviews feedback
VooDoo
Golden Member
Posts: 1553
Joined: Sat May 04, 2002 6:31 pm
Location: earth
Contact:

Asus A7N8X Deluxe Q and a

Post by VooDoo »

how can i get the mobo the se a 2.1 not a 1.5 cpu

me
User avatar
dadx2mj
Posts: 4359
Joined: Wed Nov 22, 2000 12:24 pm
Location: So Cal

Post by dadx2mj »

Have you checked the FSB setting? Sounds like it is running at 100Mhz instead of 133Mhz.
Image
VooDoo
Golden Member
Posts: 1553
Joined: Sat May 04, 2002 6:31 pm
Location: earth
Contact:

Post by VooDoo »

im i running at 2.1 and the cpu is telling the bios its a 1.5 by missstake

me
VooDoo
Golden Member
Posts: 1553
Joined: Sat May 04, 2002 6:31 pm
Location: earth
Contact:

Post by VooDoo »

wcpuid sad is a 1737 MHz w/ system clock of 133

me
User avatar
BillyGoat
Almighty Member
Posts: 3444
Joined: Wed Nov 22, 2000 2:07 pm
Location: Philadelphia, PA

Post by BillyGoat »

that makes mutipler 13
13x 166 = 2158

13x 161= 2100
[align=center]<img src="http://www.statgfx.com/statgfx/folding/?&username=Billygoat(pcabusers)&border=0,255,0&label=255,0,0&header=0,0,255&stats=0,0,0&bgcolor=255,255,0&trans=no&template=fah_original&.jpg" alt="PCA Folding Rules!" />[/align]
VooDoo
Golden Member
Posts: 1553
Joined: Sat May 04, 2002 6:31 pm
Location: earth
Contact:

Post by VooDoo »

on the post screens 2100 shows up

is that the speed or the model

me
User avatar
eGoCeNTRoNiX
Posts: 7362
Joined: Wed Oct 23, 2002 12:51 pm
Location: HELL

That's

Post by eGoCeNTRoNiX »

The Model... 2100XP
PM before Email People!!
Image
Heat Under eGoCeNTRoNiX :)
Who Farted? BEANIE!!!
!Welcome to the United States of the Offended!
User avatar
BillyGoat
Almighty Member
Posts: 3444
Joined: Wed Nov 22, 2000 2:07 pm
Location: Philadelphia, PA

Post by BillyGoat »

2100+ is the model, not speed
1733 is the actual speed

this chart is quite helpful when it comes to xp's
http://www.cybercpu.net/howto/other/amdpr.asp
[align=center]<img src="http://www.statgfx.com/statgfx/folding/?&username=Billygoat(pcabusers)&border=0,255,0&label=255,0,0&header=0,0,255&stats=0,0,0&bgcolor=255,255,0&trans=no&template=fah_original&.jpg" alt="PCA Folding Rules!" />[/align]
VooDoo
Golden Member
Posts: 1553
Joined: Sat May 04, 2002 6:31 pm
Location: earth
Contact:

Post by VooDoo »

the model is 2700

me
User avatar
eGoCeNTRoNiX
Posts: 7362
Joined: Wed Oct 23, 2002 12:51 pm
Location: HELL

You Need

Post by eGoCeNTRoNiX »

To go into the bios and set the FSB to 166 then as Bill said above.. eGo
PM before Email People!!
Image
Heat Under eGoCeNTRoNiX :)
Who Farted? BEANIE!!!
!Welcome to the United States of the Offended!
VooDoo
Golden Member
Posts: 1553
Joined: Sat May 04, 2002 6:31 pm
Location: earth
Contact:

Post by VooDoo »

thanx all

new problem:

right click on my computer hit, properties

it saids that is unknow CPU type

me
User avatar
BillyGoat
Almighty Member
Posts: 3444
Joined: Wed Nov 22, 2000 2:07 pm
Location: Philadelphia, PA

Post by BillyGoat »

yup thats a 333fsb chip
set the fsb to 166

If you have some good ram, i would definatly try going for the close to 200fsb mark- but I dont know whether you plan to o/c that bad boy or not, that MB definatly is made too ;)
[align=center]<img src="http://www.statgfx.com/statgfx/folding/?&username=Billygoat(pcabusers)&border=0,255,0&label=255,0,0&header=0,0,255&stats=0,0,0&bgcolor=255,255,0&trans=no&template=fah_original&.jpg" alt="PCA Folding Rules!" />[/align]
VooDoo
Golden Member
Posts: 1553
Joined: Sat May 04, 2002 6:31 pm
Location: earth
Contact:

Post by VooDoo »

o/c no
set the fsb to 166


done, it reads a 2700 now

me
VooDoo
Golden Member
Posts: 1553
Joined: Sat May 04, 2002 6:31 pm
Location: earth
Contact:

Post by VooDoo »

its online

now i just need to instal the audio stuff

thanx guys for your help

me
Sean
Posts: 2360
Joined: Wed Jul 25, 2001 7:33 pm
Location: Rapid City, SD
Contact:

Post by Sean »

Enjoy your new setup! :D
- Sean
Post Reply