Pics of what my girlfriend had me put to gether for her

DoPeY5007 · Post by **DoPeY5007** » Sun Jan 05, 2003 1:13 am

I am really like`n these Shuttle systems...

It has

Cel 1.1
512MB Ram
DVD-Rom
80gig Maxtor 5400
Slot Fan
USB 6x Burner

smb · Post by **smb** » Sun Jan 05, 2003 1:37 am

Those cubes are pretty neat. I think i'm gonna get one for my boys.

VooDoo · Post by **VooDoo** » Sun Jan 05, 2003 5:43 am

does that pci fan haelp with the heat

mine has a little heat problem

me

DoPeY5007 · Post by **DoPeY5007** » Sun Jan 05, 2003 1:24 pm

Originally posted by VooDoo
does that pci fan haelp with the heat

mine has a little heat problem

me

since it is under the HD, yes it does pull some heat out, I had to take the fan apart and flip it over so it would pull the heat from the HD....

nexus_7 · Post by **nexus_7** » Sun Jan 05, 2003 1:28 pm

what I did with mine is I didnt instal a floppy and I put the HD in that spot. that way, there was lots more room in the back for the rear fan to remove air from unobstructed.

I also put 2 slim 50mm fans i nthe front sucking in and cout an itty bitty hold on the side where the PS blows. Put a grill on it and the air out of the PC went right out of the case. that helped alot.

Greg

DoPeY5007 · Post by **DoPeY5007** » Sun Jan 05, 2003 1:39 pm

I am also going to cut the guard that is on the rear fan and put a normal finger guard there instead, I have read that helps as well

VooDoo · Post by **VooDoo** » Sun Jan 05, 2003 2:50 pm

i was think of cutting the front panel and install a lcd screen and two fans

do you think that would be easy to do?

and cutting a hole onto the power

me

plucky duck · Post by **plucky duck** » Sun Jan 05, 2003 3:08 pm

Is the motherboard in there upgradeable? Does the vendor offer other boards that can fit a case that size as well? Those cases are really compact looking. Sweet for tight spaces

DoPeY5007 · Post by **DoPeY5007** » Sun Jan 05, 2003 3:23 pm

Originally posted by VooDoo
i was think of cutting the front panel and install a lcd screen and two fans

do you think that would be easy to do?

Read this thread

DoPeY5007 · Post by **DoPeY5007** » Sun Jan 05, 2003 3:25 pm

Originally posted by plucky duck
Is the motherboard in there upgradeable? Does the vendor offer other boards that can fit a case that size as well? Those cases are really compact looking. Sweet for tight spaces

I don't know how upgradeable these are, they do have a bunch of other systems, but the MBs can't go from one case to another...

http://us.shuttle.com/

nexus_7 · Post by **nexus_7** » Sun Jan 05, 2003 3:44 pm

that case style only supports 2 mboards, the sv24 and sv25. there are newer cases that have the new p4 and amd stuff. both of which have AGP slots.

Greg

DoPeY5007 · Post by **DoPeY5007** » Sun Jan 05, 2003 3:47 pm

Originally posted by nexus_7
that case style only supports 2 mboards, the sv24 and sv25.

and the FV25

we actually ordered the SV25 and we were shipped the FV25, from what I read the FV25 is just a few upgrades on top of the SV25

blackhawk · Post by **blackhawk** » Sun Jan 05, 2003 4:32 pm

I'm just getting into micro atx myself but more selection of motherboards for them. I have a gigabyte socket 370 mb in an Inwin L545 case with vertical dvd that's real pretty looking and sports a tualitan 1.2 celeron. Only weakness is the built in 8mb trident video which I could replace with another pci video card.

Its small, quiet and looks great. The shuttles I've seen look good with a fair amount of variety now for the insides.

You did a nice job for the gf.

VooDoo · Post by **VooDoo** » Mon Jan 06, 2003 1:31 am

Originally posted by DoPeY5007

Read this thread

did any one go and read that i never though of that

me

VooDoo · Post by **VooDoo** » Sun Jul 27, 2003 6:28 am

Originally posted by nexus_7
I also put 2 slim 50mm fans i nthe front sucking in and cout an itty bitty hold on the side where the PS blows. Put a grill on it and the air out of the PC went right out of the case. that helped alot.

Greg

can you post some pics of that i was thinking of doin something like that

and cut holes on the side and top of the case to pull heat out

me