The Sudden Northwood Death Syndrome

FMZ · Post by **FMZ** » Mon Dec 09, 2002 5:38 am

I bet those owners of P4 are going crazy over this.

http://www.theinquirer.net/?article=6549

himura-dono · Post by **himura-dono** » Tue Dec 10, 2002 5:04 pm

it actually has more to do with p4 northies croaking at the volts their owners are throwing at them.

too bad most p4 owners won't admit that. p4 owners also swear that there will be SADS sudden athlon death syndrome, as retaliation, however, amd owners don't tend to be stupid enough to fry the same processor. we also admit to throwing too much voltage at it. imho anything over 1.95 is tooooooooooooooo much. tho on my dually, i'm undervolting now that i found my sweet spot. it's nice to run pretty high, low volts and cool.

wvjohn · Post by **wvjohn** » Tue Dec 10, 2002 7:14 pm

looked like a lot of those were cpu's that used the wire pin trick too - too much juice - not enough cooling - we know the rest

oc'ing is great , but you're gonna lose some chips

PreDatoR · Post by **PreDatoR** » Tue Dec 10, 2002 8:14 pm

I've always been one to run the piss out of my chips and i have yet to blow a AMD chip up... other than one i got the heatsink all screwed up and it nuked cause it didn't have contact to the core... I'm at 1.83 Gig 1.95v's now... chip will do 1.9 @ 2.05v's and 140f loaded... which is no where near overheating for them.

Pugsley · Post by **Pugsley** » Wed Dec 11, 2002 1:09 am

god you guys all run so hot... im at full load and im at 95... witrh a case temp of 70. im telling you heat pipes work.

PreDatoR · Post by **PreDatoR** » Wed Dec 11, 2002 1:15 am

i'm running on a 8k3a+ which reads the internal thermistor on the xp's... so its generally 15-20f higher than a socket reading... that and i have a heavy overclock going on and this is with a SLK800 and 75CFM fan... and this is the best air cooling money can buy as well... i drop down to 1.75 gig 1.85v's 120F at default 1.4 gig i'm running abuot 5 degree's above room temp...

chottoED · Post by **chottoED** » Tue Dec 17, 2002 11:21 am

i'm perfectly happy with my 1.6a running at 2.36GHz @ 1.5v

TheJester · Post by **TheJester** » Fri Dec 20, 2002 2:32 am

another stupid thing those overclocking owners do they always boast how they overclock on a stock cooler I'm like WTF?????????????????????? you moron go get a f*cking TT or coolermaster hsf just something decent but not stock!!!!! on my 1.7ghz celeron I have more then plenty cooling I forgot the model but its the cooler master with 38cfm up to 2.8ghz my temps are sooo nice and for my athlon xp 1700+ I have a volcano 5 which is just enough (plan to get a 9 later) but for gods sake if you overclock your 1.6A 400mhz to 2.1ghz 533mhz fsb on stock voltage be happy with that and for sure dont use stock with that I say Sudden Northwood death syndrome is caused by moron owners who think stock is enough

MAC · Post by **MAC** » Sat Mar 08, 2003 3:48 pm

Hopefully that won't happen here. My 1.6A has been running rock steady at 2.24 GHz (140 FSB) for almost a year. Voltage is at 1.525 and using the STOCK heatsink and fan the CPU temp stays in the 90 - 95 F range.

MAC

rat fink · Post by **rat fink** » Wed Apr 09, 2003 9:48 am

heat pipes?? is there a link? were do they go??

b-man1 · Post by **b-man1** » Tue Apr 15, 2003 10:35 pm

75CFM fan

how loud is that cpu fan, pred? and what rpm's come outta that thing? i had a 7k rpm 48cfm and it was LOUD.