help with old computer!!!!

fearfox · Post by **fearfox** » Thu Mar 28, 2002 11:30 pm

okay i assembled a old pc i had closet order some parts to fully assemble it. now the problem is that only hd works. when i try different cd-rom drives on the same or different ide cable i cant get anything it just wont detect any cd rom drive but it works under dos. weird but when i am in windows it does not show.

thx

David

NascarFool · Post by **NascarFool** » Thu Mar 28, 2002 11:54 pm

Check the jumpers on both drives. What brand and model hard drive is it? You might have to connect both and then auto detect them in the bios.

fearfox · Post by **fearfox** » Fri Mar 29, 2002 12:00 am

one drive is set to master the hd and slave cd rom. Then on second ide cable its set to master when i connect it to there nuthing. Tried three different cd rom drives Generic 8x, aopen 52x, Iomega 12x8x32 its on autodetect under bios

blade · Post by **blade** » Fri Mar 29, 2002 12:25 am

Which os?

And have you tried other ide cables?

fearfox · Post by **fearfox** » Fri Mar 29, 2002 12:41 am

its win 95 os. actually i have not tried any other ide cables cause it uses like some old ata cables and it dont accept new ata cables dont work on it. its like it dont fit. will go to store tommorow to try find a cable
but why does it work with hardrive only on both cables.

blade · Post by **blade** » Fri Mar 29, 2002 12:51 am

hmm, do you have the hard drive jumpered as master or as the only drive? Some have cable select and other ways to jumper it so be sure it's set to master only. With one jumper setting I believe it's meant to be just one drive on the ide channel so any other drives will not work. Worh a shot anyway. If the jumper settings aren't clear then I'd try various others.

fearfox · Post by **fearfox** » Sat Mar 30, 2002 4:02 pm

sorry blade tried that already. Okay i see something weird when i hook up hardrives it has no problem detecting them but it wont detect cd-rom drive even if its only thing connected to ide cable. tried Slave, master, Cable select. Nuthing. It only detects hardrives.

Guys i was wondering okay if i network one of my computers to share cd rom drive with the old computer can i run cd rom just by double clicking on the cd rom shortcut from other computer. Assuming theres a cd in the cd-rom drive. would this work????