I'm bein' a whore tonite....

VidmanII · Post by **VidmanII** » Sat Feb 16, 2002 1:40 am

Yanked out my Iwill xp333r and am testing a Shuttle AK35GTR.

nexus_7 · Post by **nexus_7** » Sat Feb 16, 2002 1:58 am

AND?

GReg

PreDatoR · Post by **PreDatoR** » Sat Feb 16, 2002 2:20 am

Yeha let us know how that is Vid... I might have to snag one of those...lol

Insane Morphius · Post by **Insane Morphius** » Sat Feb 16, 2002 3:00 am

I just LUV the title to this one

So let us know how it all went, and how high you got the magic XP too.

NascarFool · Post by **NascarFool** » Sat Feb 16, 2002 10:12 pm

Did you have any problems with the Radeon 8500 with the XpP333-R ? I had problems when using 32bit color. I installed an Asus A7V266 and the problem is gone. Now if I could get the DOA Dragon Plus replaced, I'll get back to overclocking.

nexus_7 · Post by **nexus_7** » Sat Feb 16, 2002 10:14 pm

yea he had text corruption. it wasnt pritty. he sent me a picture of it...Or maby it was jsut XP that was so ugly

Greg

VidmanII · Post by **VidmanII** » Sat Feb 16, 2002 11:30 pm

Shuttle pretty much blows. I'll prolly keep it for a month until some of the newer mobos come out.

nexus_7 · Post by **nexus_7** » Sun Feb 17, 2002 12:08 am

fricken newbe. Learn how to run it and get back 2 us.

Greg

VidmanII · Post by **VidmanII** » Sun Feb 17, 2002 12:14 am

Well I got the baitch up over 1700 (1713 MHz, 149 FSB) but no thanks to the VIA HO Nexus_7 unless you consider not telling me any BIOS settings a big help. I still think it blows. Takes 1.95v to get there and it only took 1.89v on the XP333R. Typical VIA.

nexus_7 · Post by **nexus_7** » Sun Feb 17, 2002 12:18 am

same via crap you were refering to when u said it was running at 1650 and was Stil lfaster then when the ALI was coughing along at 1700? Must me. LOL

Greg

VidmanII · Post by **VidmanII** » Sun Feb 17, 2002 12:34 am

I do like the layout of the board. That's about it tho.

nexus_7 · Post by **nexus_7** » Sun Feb 17, 2002 12:39 am

just gata look into it liek Anyboard. Look at all the crap U had to play with in the bios...but OH NOOOO when it comes to VIA ya gata go on auto pilet?

Greg

VidmanII · Post by **VidmanII** » Sun Feb 17, 2002 1:04 am

Yeah, It's gettin' there. Tonite was really only the 2nd chance I've had to mess with it. I've been workin' all weekend. I'll post some numbers on MON when I'm off and see if can get it higher. Right now it's at 1713 ( 149 FSB) @ 1.9v and seems stable in limited duty. I think it was an aggressive mem setting that was holding me back initially. DRAM control command was at 1 and now at 2. That got me up to where it's at now ( cas 2, 2t,6t,2t, 4-way etc. ) Mem #'s are higher than the XP333R but the Iwill's a bit higher in Sisoft Multimedia bench so it's not like the XP333R is slow or anything.

chottoED · Post by **chottoED** » Sun Feb 17, 2002 1:12 am

sellout

PreDatoR · Post by **PreDatoR** » Sun Feb 17, 2002 1:19 am

Thats all you can get out of that 1800+ is 1.71 gig! I'm a whole 10mhz off from ya with my 1700+ i need to crank her up a lil more and see how high i can push it.... DAMN VIA anyways

GO ALI!!!