Those with 8K7A's tryin' to run an XP with WinXP or Win2k you are WARNED!!!

Discussions about anything Computer Hardware Related. Overclocking, underclocking and talk about the latest or even the oldest technology. PCA Reviews feedback
Post Reply
PreDatoR
Life Member
Posts: 5554
Joined: Wed Nov 22, 2000 8:01 pm

Those with 8K7A's tryin' to run an XP with WinXP or Win2k you are WARNED!!!

Post by PreDatoR »

God damn it!! Got my replacement AMD XP 1700+ yesterday after the first one wouldn't work correctly... Well i've narrowed it down to the motherboard :( For some reason this Epox 8k7a will not run that XP... I've tried 3 different psu's and it will lock when trying to boot up and reboot randomly... Looks like a new mobo will be on my way to see i highly doubt i've got 2 bad chips in a row that have the same problem... The AXP's are pretty much the same chip and use less power than the birds so it should run with no problem... Unless i've got an older revision of this board that don't work with the XP's :(

Check out this thread at AMDMB It ain't the chip...

http://www.amdmb.com/vb/showthread.php? ... adid=75116
Top
User avatar
VidmanII
Posts: 2465
Joined: Wed Nov 22, 2000 9:54 pm
Location: Egg Harbor, NJ

Post by VidmanII »

I tried my 1800+XP on an Iwill KK266R ( KT133A) and it ran like crap. While alot of the mobo mfgrs are saying the XPs run on the older chipsets, I think they're full of baloney
AMD Ph II X4 955 BE 3.2 @ 3.8 GHz | Scythe SCSMZ-2000 | ASRock 880GMH/USB3 | 8 GB G.Skill DDR3 1600 | Radeon HD5670 | Kingston 128GB SSD
Top
PreDatoR
Life Member
Posts: 5554
Joined: Wed Nov 22, 2000 8:01 pm

Post by PreDatoR »

I'm fixin' to order a Iwill XP333R rev 2.1 right now! Epox don't wanna fess up that there is a problem some have no problems others have a ton of problems i'm one of hte unlucky ones it looks like... GRRR Oh and Alumina is a waste of money IMHO... I have the Orig. AS... Temps 98 idle with the Senfu and the loud ass fan that came with it... AFter i put my 1.33 back in i put alumina on it... Idle temp 104 now... Go figure...
Top
User avatar
JMan
Golden Member
Posts: 855
Joined: Wed Nov 22, 2000 11:02 am
Location: SoCal

Post by JMan »

Not that this will help anything, but is Alumina a waste of money just because your temp readouts are higher now than before? What's your testing method? Are all the reviews about Alumina vs AS1 wrong?

JMan
"Have you ever heard of the Emancipation Proclamation?"
"I'm sorry, I don't listen to hip-hop."
Top
PreDatoR
Life Member
Posts: 5554
Joined: Wed Nov 22, 2000 8:01 pm

Post by PreDatoR »

I know what i seen form your own opinions... It was applied jsut like the AS was.... Its nice to clean up but when i see a 6 degree temp jump i don't care for that too much...
Top
User avatar
Hipnotic_Tranz
Almighty Member
Posts: 3750
Joined: Wed Nov 22, 2000 6:35 am
Location: Indpls, IN
Contact:
Contact Hipnotic_Tranz

Post by Hipnotic_Tranz »

hmm, thats odd. I have an 8K7A+ running an Athlon 1600+ fine with no problem. My friend is running an 8KHA+ with the same CPU, no problems. I wonder if there are older "revisions" as you said and you just got unlucky? :confused:
[align=center]<img src=http://i54.tinypic.com/j9tydf.gif>
<i>
My get up and go
must have got up and went.
</i>[/align]
Top
PreDatoR
Life Member
Posts: 5554
Joined: Wed Nov 22, 2000 8:01 pm

Post by PreDatoR »

There's 3 revisions of the 8k7a that i've seen the 1.0 1.1 and 1.2.... The only boards noted as having hte problem are the 1.0's and 1.1's... Haven't seen anyone with a 1.2 that has the same problem with it... It would be nice if they'd get a newer bios out other than the 10/17 bios... Guys are getting the XP's to work with the 7/11 bios but that dont' have support for XP's and SSE isn't enabled with that bios... I ordered a XP333 last night and this thing is out the door...
Top
User avatar
Rooster
Senior Member
Posts: 370
Joined: Wed Nov 22, 2000 12:21 pm
Location: Center of Eternity

Post by Rooster »

I'm running a XP1800+ , 8K7A and WinXP. everything is and has been running fine for two months.
Image
Top
blade
Posts: 9113
Joined: Wed Nov 22, 2000 1:56 am
Location: LV-426
Contact:
Contact blade

Post by blade »

I have been testing and still am testing alumina, as 2 and as 3 along with nanotherm and there's no way alumina is worse by at most 1-2 degrees than the others. Perhaps you got a bad tube. I have gone through 3-4 tubes so far along with 4 tubes of as 2 and still in one tube of as 3. On my first tube of nanotherm.

I like to be sure in my reviews so I'll re-apply compound sometimes 4-5 times to be sure of the results. So I go through a lot.

It does make a diff if too much or too little is applied, and I know you know that. Must be a bad batch I guess.
[align=center]<img src="http://www.statgfx.com/statgfx/folding/?&username=blade&border=0,0,64&custom=21,138,255&label=79,79,255&header=149,202,255&stats=0,255,255&bgcolor=0,0,181&trans=no&template=fah_original&.jpg" alt="www.Statgfx.com" />
<img src="http://www.pcabusers.org/funnies/monkey2.gif">
<i><small>"Too much monkee business"</i></small>[/align]
Top
PreDatoR
Life Member
Posts: 5554
Joined: Wed Nov 22, 2000 8:01 pm

Post by PreDatoR »

what revision is your board rooster? what bios is it using? go to that link and read the shit about this baord and xp's.... I emailed Epox about it haven't heard anything back and probably won't...
Top
User avatar
Rooster
Senior Member
Posts: 370
Joined: Wed Nov 22, 2000 12:21 pm
Location: Center of Eternity

Post by Rooster »

Predator, Where's the rev # on the mobo?? I cant find it, too many cables or beers. My bios is 10/17/01
Image
Top
PreDatoR
Life Member
Posts: 5554
Joined: Wed Nov 22, 2000 8:01 pm

Post by PreDatoR »

normally its on the last pci slot where ya can't see it without pulling hte mobo out or using a mirror...
Top
Post Reply

Return to “General Hardware”