I received this older system - PIII ABIT VP6.
System will not complete its boot/post.
Halfway through boot (using POST card), booting process will stop at C0 - Boot with Int 19 (Phoenix BIOS).
Questions:
1. What is "Boot with Int 19?"
2. Thoughts on why booting is stopping there.
Nothing is currently connected to the board, except:
POST Card
CPU
RAM
Power
Video (and tested without video card) - no video shown at all
Thank you.
ABIT VP6 - boot failing
-
Shadow250
- Golden Member
- Posts: 1172
- Joined: Fri Jan 04, 2002 9:08 pm
- Location: Walton New York 13856
- Contact:
my code book says" try to boot with INT 19" beep 4-1-1-1 thats from a preferred post from eurosoft. try resetting the bios, set it to defaults it may be the problem.
this: http://www.ata-atapi.com/hiwdos.htm indicates there is a problem with your bootsector on the floppy or hard disk INT 19 is executed after post completes.
this: http://www.ata-atapi.com/hiwdos.htm indicates there is a problem with your bootsector on the floppy or hard disk INT 19 is executed after post completes.
<a href="http://www.heatware.com/eval.php?id=9490"><font color=red>My Heatware<font/></a> <font color=white><font size="2">
