*Splitting into chunks...but case/WCing must go before anything else will be sold*
So, here is what you are gonna get:
2.4C SL6Z3 M0 Stepping. OC'ed to 3.4ghz prime stable, then I jumped to 3.5 and prime failed...never bothered with anything in between.
Abit AI7
2x256 TwinMOS PC3700 BH-5 chips
2x40 2mb 7200 RPM HDD's and PCI RAID 0 controller. Arrays been working great for over 6 months, no problems.
Radeon 9600Pro video card
Antec True 500watt Power Supply (might even be a 550, I can't remember, if it's really important I'll find out)
The cooling:
a 6.75" fan which is 24v, I run it at 7v because it's very nice and quiet (3.4ghz is stable at 7v), I have a switch by the floppy drive to set this to 12v and it's still probably under 35-36db.
an '89 camero heatercore, this is a pretty big heatercore, all copper.
Pump is an Ehiem 1250 pump, very solid!
Waterblock is a DangerDen RBX
The best part with this is cool air is pulled from the outside and sent into the rad and then directly out of the case, the warm air does not go into the case!!!
Comes with a chieftec dragon full/server tower. The power supply takes up 3 bottom 5.25 bays and 1 of the 2 3.5 bays for flopppy, or you can move the PSU to the top and have 2 open 3.5 bays and 2 5.25 bottom bays. In the picture you see 3 5.25 drives, I only have one of the plates to cover 5.25 bays so you should probably have 2 opticals
If you order now I'll throw in the 3.5" floppy for FREE!!!!
Conditions for sale:
I'll pay shipping via fedex ground anywhere CONUS. I am going to DRAIN the water before shipping. I'll include a bottle of water wetter (excellent additive, large bottle and a lot left), and blue water die (very potent...will do tons of systems)
I would really like MO or bank wire transfer as I believe paypal will take a chunk out of the sale.
I'll ship to Canada at owners expense and will NOT claim as gift, so duties will be on you. For alask/hawaii contact me for shipping.
Couple of images here:
pic 1
pic 2
pic 3
pic 4
Here is a URL with more images, I urge casual browser to please not visit as I have very limited bandwidth!
*NOTICE* low bandwidth for that site, please only serious inquiries!
http://www.geocities.com/ajrettke/p4.html
Pictured are rounded IDE cables, those will NOT be included (I will include IDE cables though), nor will the other PCI card you see below the USB bracket. There are also 3 HDD in the picture, only the 2 40gb's will be included. And of course, the opticals and NewQ are not included (if interested in NewQ you can contact me).
Finaly, the price:
800 shipped fedex ground, and insured.
I realize the video card kinda takes away from being ultra high end so I'll without the video card for 700.
*SPLITTING*:
The case, pump, waterblock, radiator, fan, water whetter, and blue die...along with the hosing and clamps and case fans, grill guard, and radiator/fan housings will all be sold together for:
175 shipped
mobo/cpu/ram
2.4C/AI7/2x256 PC3700
350 shipped
2x40gb 7200rpm 2mb cache drives WITH the controller
90 shipped
Radeon 9600pro (havn't OC'ed it, never got the time)
110 shipped
Antec True PSU (again not sure if it's 500 or 550)
85 shipped
*you can call dibs on any parts now, but I'll ONLY SELL IF THE CASE/WCing setup is bought*
New to this forum, but have traded on amdmb, anandtech, and overclockers
Heatware under ATC9001 (can send confirmation email from ajrettke@mtu.edu if need be)
FS: High End 2.4C, WCing Setup
-
70Chevelless454
- Goober Member
- Posts: 6
- Joined: Tue Mar 02, 2004 5:14 pm
- Location: Fallowfield PA
- Contact: