Creative Can Bite Me!
- FlyingPenguin
- Flightless Bird
- Posts: 33162
- Joined: Wed Nov 22, 2000 11:13 am
- Location: Central Florida
- Contact:
Creative Can Bite Me!
I went to their site to download some drives. You know what? Now they have a friggin' download queue like some of the game demo download sites.
All I want to do is download a friggin' driver for one of their cards and I have to wait because there's 172 people in front of me? What kind of BS is that?
Thanks goodness for driver sites.
All I want to do is download a friggin' driver for one of their cards and I have to wait because there's 172 people in front of me? What kind of BS is that?
Thanks goodness for driver sites.
---
“The Government of Spain will not applaud those who set the world on fire just because they show up with a bucket.” - Prime Minister of Spain, Pedro Sánchez

“The Government of Spain will not applaud those who set the world on fire just because they show up with a bucket.” - Prime Minister of Spain, Pedro Sánchez

- FlyingPenguin
- Flightless Bird
- Posts: 33162
- Joined: Wed Nov 22, 2000 11:13 am
- Location: Central Florida
- Contact:
The Creative SoundBlaster hey-day is over. They used to be the standard of the industry, but no more.
I was ELATED to ditch my SB Live Gamer+ card when I upgraded mobos. The onboard C-media on this IWill XP333 sounds just as good without any of the IRQ sharing hassles or driver problems.
I was ELATED to ditch my SB Live Gamer+ card when I upgraded mobos. The onboard C-media on this IWill XP333 sounds just as good without any of the IRQ sharing hassles or driver problems.
---
“The Government of Spain will not applaud those who set the world on fire just because they show up with a bucket.” - Prime Minister of Spain, Pedro Sánchez

“The Government of Spain will not applaud those who set the world on fire just because they show up with a bucket.” - Prime Minister of Spain, Pedro Sánchez

Herc GTXP! thats all i gotta say... Blows the SB Live! outta the water and from what others have told me puts the Audigy to shame as well. I was using the Cmedia for a while. Had this Herc just sitting here decided to install it one day and the sound quality to me was like night and day. I've got a set of Z560's and you could really tell the difference in these speakers from one card to the next... the cmedia is very good for onboard and definately better than the lives! were...
I got my GTXP before the Audigy came out. I haven't felt the need to upgrade yet. I don't know if you could really say there is anything consumer level yet that would be an upgrade. I saw a comparison between the GTXP and Audigy and if I remember right they were so close that I think in some things one edged out the other and vice versa.
the download Q would be ok if when you are downloading you get like over 200k but it has been 40-50k for me the few times I have tried/tested it. kind of annoying.
Greg
Greg
<a href="http://www.pcabusers.org" target="_new"> <img src="http://www.pcabusers.org/images1/banner.jpg" border="0"></a>
<a target=NEW href="http://setiathome.ssl.berkeley.edu/stats/team/team_87793.html">JOIN the PCA Seti Team!</a>
<a target=NEW href="http://setiathome.ssl.berkeley.edu/stats/team/team_87793.html">JOIN the PCA Seti Team!</a>
- Executioner
- Life Member
- Posts: 10354
- Joined: Wed Nov 22, 2000 11:34 am
- Location: Woodland, CA USA
That's what I call "creative" downloading.

These are the instructions that came with my Thermalright SLK-800 cooler:
Assembly:
The assembly gestalltet itself just as simply as with the standard Slk-800. after the foil of the base plate was removed and the processor core with thermal compound moistened, leaves one the 6-Punkt-Halteklammer in the base noses to engage. Subsequently, the radiator box is aligned centrically on the base. By means of slotted bolt turners finally the catch side of the fixing clip down pressed to these on the base engages. A strammer contact pressure develops, whereby a good waermeaufnahme is ensured. Although the additionally existing PU Schaumpads provides for a safe seat on the processor, the PC should very carefully be transported and/or the radiators before transport be developed.
Assembly:
The assembly gestalltet itself just as simply as with the standard Slk-800. after the foil of the base plate was removed and the processor core with thermal compound moistened, leaves one the 6-Punkt-Halteklammer in the base noses to engage. Subsequently, the radiator box is aligned centrically on the base. By means of slotted bolt turners finally the catch side of the fixing clip down pressed to these on the base engages. A strammer contact pressure develops, whereby a good waermeaufnahme is ensured. Although the additionally existing PU Schaumpads provides for a safe seat on the processor, the PC should very carefully be transported and/or the radiators before transport be developed.
