Homemade rounded cable

NascarFool · Post by **NascarFool** » Fri Dec 07, 2001 9:35 pm

Well, I have made them using electrical tape but the tape starts coming loose after a month or so. Tonight I was bored, so I grabbed a piece of 1/2" tubing and made a rounded cable for use on my DVD and CDRW drives. The tubing is un-split, it was fun getting the connectors off each end of the cable and putting them back on. I will install it and see if it works now.

[img]http://www.nascarfool.com\pics\round.jpg[/img]

dadx2mj · Post by **dadx2mj** » Fri Dec 07, 2001 11:30 pm

Looks like a pretty good job hope it works for ya

NascarFool · Post by **NascarFool** » Fri Dec 07, 2001 11:45 pm

Works great. I did the floppy cable too. As you can tell, I am bored tonight. Seeing how it is "TTOTM" (married men should know what that is) I could probably do a big box of them.

renovation · Post by **renovation** » Sat Dec 08, 2001 1:10 am

SWEET that one word saids it all

Hipnotic_Tranz · Post by **Hipnotic_Tranz** » Sat Dec 08, 2001 10:09 am

Nice, I bet it was a bitch to get those ends off and back on again (in a way that the cable would still work afterwards, that is

)

NascarFool · Post by **NascarFool** » Sat Dec 08, 2001 10:14 am

I put one ond on wrong. Had to pull it off and turn it around. Works just fine.