first system specs:
Shuttle 41 (NF2 chipset)
1700+
1g 2700
200g wd
dvd rw
fan controler
Radeon 9700aiw
Ok, nothing special there
I first epoxied a p3 heatsink and fan to the top of the ICE unit because it was getting a little worm. I also removed the rear grill and installed an 80 to 92mm alluminum fan adaptor. I then removed the 40mm fan from the back of the PS and moved it to the front of it. I removed the PS fan grill, and then put a Green 40 to 60mm fan adaptor on the outside and a 60mm fan on it. Very tight fit with the 60 and 92mmfan sitting there but I was able to squeez it all in there.
I had origonally done this case in all UV lighting, but I can no longer find 4" or 6" uv lighting, so I changed the whole look and went Green. Have 2 6" green cathodes inside, the inside fan is a quad green, the 92mm is also a quad green led, and I actually found a 60mm quad led fan (which is currently multi color, but I will have pugsley change that @ the LAN). I will also have a origonal plexi front from Xport1 one of these days.
Ill get some pics one of these days
Oh I also have a remote start on this. Hit the remote, and the rig lights up.
And like all my other main rigs, Quiet!
Greg
Been tweaking my shuttle box all week.
Been tweaking my shuttle box all week.
<a href="http://www.pcabusers.org" target="_new"> <img src="http://www.pcabusers.org/images1/banner.jpg" border="0"></a>
<a target=NEW href="http://setiathome.ssl.berkeley.edu/stats/team/team_87793.html">JOIN the PCA Seti Team!</a>
<a target=NEW href="http://setiathome.ssl.berkeley.edu/stats/team/team_87793.html">JOIN the PCA Seti Team!</a>
