Page 1 of 1
Posted: Mon Mar 26, 2001 1:58 pm
by vladgur
Hey guys I just got a Abit KT7A raid +Tbird combo from Frys for $329 and Everything is working great, except it takes a really long time for Win2k to shutdown or restart.(I used to have a similar problem with Abit p2b-d untill I got its ACPI fixed) What is happening?
Also the board recognized the cpu as 7.5x100 by default(running at 750mhz) I had to change it to 7.5x137 to run at 1 Ghz. Is that right or was my cpu mismarked?
Posted: Mon Mar 26, 2001 3:21 pm
by vladgur
Also Sandra is posting some low scores:
Current CPU(Athlon 1Ghz 7.5x137.5
Dhrystone: 2341 MIPS
Whetstone: 1144 MFLOPS
Integer MMX Enh: 4552 it/s
Floating Points 3DNow: 5238 it/s
Reference AMD Athlone 1GHZ:
Dhrystone: 2805 MIPS
Whetstone: 1375 MFLOPS
Integer MMX Enh: 5463 it/s
Floating Points 3DNow: 6838 it/s
Any recommendation on whats going on?
Posted: Mon Mar 26, 2001 5:44 pm
by nexus_7
Just pop the heatsink off and see what the chip says they have there speeds etched into there core. if it is the wrong chip it is time 2 bitch.
Greg
Posted: Mon Mar 26, 2001 6:13 pm
by vladgur
I believe when I looked at it, it did say 1000, i'll double check tonight. But is it normal for mobo to default to 7.5x100 for a 1GHZ chip? its a new 266FSB athlon
Posted: Mon Mar 26, 2001 7:37 pm
by nexus_7
my a7v and a7v133 both read my 1gigers at 10x100. Not sure about the new flavor of the 266ers though.
Greg
Posted: Tue Mar 27, 2001 6:36 am
by Buzz
If it's a 266 fsb chip, then the multiplier is as you stated, 7.5x. Fsb should be set to 133MHz -> 7.5x133=1000MHz...
Also, the mobo doesn't necessarily detect the correct settings of the cpu, You'll have to set it up maually in the BIOS.