PCA Forums

Posted: **Tue Nov 28, 2000 4:53 pm**

Just wondering here, I finally pushed the little monster to 180mhz bus this morning (800eb at 1080mhz). How high have you pushed your chip?

Posted: **Tue Nov 28, 2000 9:08 pm**

fastest i've been able to get my 600e is 142 - don't know what's holding me back but it's fast enough - i run at 133 because that is rock stable always and i've only got a gorb on it

Posted: **Wed Nov 29, 2000 9:26 am**

that GORB isn't that bad, but it's all I have too. I found that placing a better HS and fan on the chipset, and a HS on the clockgen have gotten me the best results on a CUSL2.

Posted: **Thu Nov 30, 2000 7:16 am**

So far my 1 ghz T-bird's at 1200mhz by multiplier only (100x12) after closing the L1 bridges with defroster grid paint.

Posted: **Sun Dec 03, 2000 8:27 am**

144, then my cpu craps out....

Posted: **Sun Dec 03, 2000 11:21 am**

133 - the sweet spot. No desire to go hire as the system rocks.

LJ

Posted: **Mon Dec 04, 2000 5:22 am**

800 PIII 100fsb @ 133fsb 1064mhz likewise LarryJoe..

Posted: **Mon Dec 04, 2000 10:24 pm**

142 currently stable as a rock and 150 got to desktop and froze and didnt bother going for a few more extra mhz's

Posted: **Tue Dec 05, 2000 2:49 am**

200mhz. Hehe, Go athlon!!

Frost.

Posted: **Wed Dec 13, 2000 12:00 am**

Room mates 600E @ 864 mhz my old processor voltage at 1.7 volts. Not a bad processor. Had a Mc1000 peltier setup on it and ran 930 mhz. This is the old stepping

Mine is a 700E @ 1001mhz 1.9 volts using h20 to cool it with. Goes into windows at 1050mhz but locks up in desktop. Been working fine for 6 months now

Jen

PCA Forums

what bus speed are you running, or what is the highest you've run?