BH6 & CuMine

LutaWicasa · Post by **LutaWicasa** » Wed Jan 10, 2001 11:00 pm

Considering an upgrade. How many out there are successfully running CuMines on old BH6 rev 1.01?

Post by **sbp** » Wed Jan 10, 2001 11:46 pm

I'm running a Celeron 2 566 @ 876Mhz on my BH6 1.01

skeeter · Post by **skeeter** » Mon Jan 15, 2001 3:26 am

BH6 is pretty old, and a 133 MHz. bus on a BH6 is pushing it... I did have a celermine running at 850 on my old bh6 at a 100 Mhz. bus though... If your ram can handle 133 MHz., and you have a video card that can handle the 89 MHz. agp bus, you have a <i>chance</i>, but you would have a much nicer chance with a newer 815 board...

Post by **sbp** » Mon Jan 15, 2001 8:58 am

BH6 rev 1.01 takes up to a Coppermine PIII 600e. The only BH6 revision that has 1/4 PCI divider is the BH6 1.1 all the others like 1.01 have 1/3 PCI divider.