modding voltage on mobo
Posted: Tue Oct 22, 2002 2:47 am
how hard is it to mod my mobo so i can take my v core higher than 1.850.
and is id hard on the mobo
and is id hard on the mobo
Page 1 of 1
Posted: Tue Oct 22, 2002 10:24 am
what mobo do you have?
Posted: Tue Oct 22, 2002 3:23 pm
abit kg7 raid
Posted: Tue Oct 22, 2002 7:36 pm
Easier to just get a new board and not take the chance at hosing the board. But if you must do it. Go to amdmb.com forums and ask over there. There's some serious modding freaks over there that will know... 
Posted: Thu Oct 24, 2002 12:20 am
If a mod involves soldering and/or component changes that you haven't any experience with - leave it alone.You'll be glad you did.On the otherhand, If you have some experience working around SMT without any major screw-ups and have good eyes amad a clear plan then by all means Go for it.I don't ever condem the "do it your self" crowd, but be forewarned; It's your board and your problem if you take a risk and meet failure.
Posted: Thu Oct 24, 2002 2:35 pm
This page tells you how to do it: http://www.ocinside.de/index_e.html?/ht ... vcore.html
I volt modded my KR7A, it took a while because I tried to be super careful, but it did work.
I volt modded my KR7A, it took a while because I tried to be super careful, but it did work.
Posted: Thu Oct 24, 2002 4:05 pm
how high did you get you're v core after modding