Page 1 of 1
XP2200+ Unlocked
Posted: Sat Jul 20, 2002 6:08 pm
by NascarFool
I got it unlocked and ran a few tests. Still a little warm to run 3D Mark 2001SE. I need more cooling !
XP2200+ @ 12x166@1.825v
Diode temp: 49ºC idle
Compunurse probe temp: 33.5ºC idle (on heatsink)
Sys Specs:
XP2200+ with Heatpipe HSF
Epox 8K3A+
400w PS
512megPC2700 (Samsung)
Radeon 8500 Retail 64meg
40gig WD on IDE3
30gig WD on IDE4
10gig WD on IDE4
16x DVD on IDE1
40x12x40x Plextor on IDE2
SB Live X-gamer on PCI 4
NetGear 311 on PCI 5
1.44 floppy
Posted: Sun Jul 21, 2002 7:16 am
by sethpa
Nascar, you mean it crashes running that benchmark at 49C, or you don't want to try at that temp? Should be safe to at least 60C.
sethpa
Posted: Sun Jul 21, 2002 9:11 am
by NascarFool
That temp is at idle. When I ran 3D Mark 2001SE, it ran about 4 tests before it crashed. It was a blue screen that said it stopped Windows to prevent damage. I had the vcore at 1.85v and the mem at 2.7v.
Posted: Sun Jul 21, 2002 11:40 am
by PreDatoR
Vmem 2.9.... sounds like it needs some ram juice lol
Posted: Sun Jul 21, 2002 5:53 pm
by VidmanII
give it 1.9v on the cpu and up the ram voltage to 2.8v if you can.
Posted: Sun Jul 21, 2002 8:08 pm
by NascarFool
I dropped the multiplier to 11 and upped the FSB to 175. Voltage is at 1.70 vcore and 2.7v mem. Damned stable too. Temps: 44ºC on MBM5 (same as bios) and 31.5ºC on the Compunurse probe. The probe is glued to the center of the HS, right under the retaining clip. I'll try 180 FSB in a bit. Below is my 3D Mark 2001SE score. In SANDRA, the mem score went over 2700 too.
Posted: Sun Jul 21, 2002 10:28 pm
by PreDatoR
I wanna know how your gettin' those mem scores... at 166 i'm still 200 behind you... Wonder if its cause i've got 2 sticks of 256 megs... gonna pull one later and test it out then test it with the ram in different sluts... I really need to unlock this sucker!