Page 1 of 2
AXIA Y really IS as good as they say!
Posted: Wed Aug 08, 2001 1:00 pm
by Zak33
Always a little sceptical................but got me a KK266 , an SK-6 with a Delta, and an AXIA Y
Really quite remarkable.......un bl@@dy believable as it goes!
SO far..............straight in at 1466 (11x133) with no hassle and case on, windows in the house shut, warm weather etc
Then I gave 11.5x133 a go, upped the volts a tad.........no hassle again....1533
Tried the other way around.............11x 140= 1540......BINGO BANGO BONGO
No trouble at all.....won't pus hthe mem any more thsn that. I have cack memory, really cheap PC133, three different sticks, so it is CAS3, but my absolute word.....it FLIES!
Gonna try a bit higher, but hey.........what more do I need?
question is............
Posted: Thu Aug 09, 2001 5:31 pm
by Zak33
is any one SAD about their AXIA Y?
COme on......share...............
Posted: Thu Aug 09, 2001 6:00 pm
by nexus_7
i just have a standard 1g axi chip and it does 1.5 air cooled NO delta. so what ever this is worth to U take it and use it as you see fit.
Greg
remarkable
Posted: Fri Aug 10, 2001 2:36 am
by Zak33
truly awesome batch of chips.
Posted: Fri Aug 10, 2001 6:13 am
by wvjohn
i have one sitting on my desk in it's little plastic house waiting for the new mobo, which should come today (shuttle ak31)
then you, dear chap................
Posted: Fri Aug 10, 2001 5:17 pm
by Zak33
have one of the best overclocking weekends ahead of you .........ever
Posted: Sat Aug 11, 2001 4:17 pm
by Zak33
How you getting on WVJOHN?
Are you with us yet?
Posted: Sat Aug 11, 2001 7:25 pm
by Rayzor
Another good batch of chips are the AYHJA "Y" Many of the highest flying birds over at
Overclockers.com are this series , alas, my 1.33 is only the AYHJA K, but she's soaring comfortably @ 1500 feet
Posted: Sat Aug 11, 2001 7:49 pm
by Rayzor
Oops, my bad! double-post
Posted: Sat Aug 11, 2001 7:57 pm
by wvjohn
zak, mobo came but i may not be able to get it up and running for a few days - parental duties, etc. I have to take down my main system which i don't want to do until i have plenty of time and a peaceful state of mind. whenever i build something in a hurry i create 5x work and don't enjoy it. i especially want to think through the layout of the entire system, instead of just slopping the old stuff in like i usually do..........but i'll report back soon
Posted: Sat Aug 11, 2001 10:28 pm
by VidmanII
my 1.33 axia y does 1533 (9.5x161) and i like it .
Of course, the Iwill kk266r plays a big part too.
My AXIA Y 1 gig
Posted: Sun Aug 12, 2001 4:58 am
by Zak33
also does 1533........goes a bit higher on the FSB but not too happy about it myself......small steps
10.5 x 143 at the moment.......highest FSB I feel 100% about on my cheap mem and my SCSI card is PCI so don't wanna lose the reliability it brought with itself!
have not had a 50% overclock success since my Celery 366.........and this baby is WAY quicker point to point, mghz for mghz than that old duffer!
Posted: Sun Aug 12, 2001 9:15 am
by blade_146
my ayhja 1.33 only does 1450 stable. it'll get into windows at 1500 but freezes if i run f@h. i'm using a taisol copper bottom and a delta. i have a new delta 50cfm fan i havent put on yet. i have to get some longer screws. have you guys seen these badboys? its quite a bit "thicker" than the older deltas.
Posted: Sun Aug 12, 2001 1:47 pm
by wvjohn
up and running on a shuttle ak31 w/512 pc 2100
memory scores are real low - i really need to do a reinstall of win2k
i did the lazy way and simply substituted this mobo fior a bx board
booting off a promise 66 card
at 1330 at 8.0 v right now - seems like this chip may have long legs (10x133)
mobop setup in a snap
_
Posted: Mon Aug 13, 2001 9:16 am
by Kakarot
at 1330 at 8.0 v right now
8volts!? holy schmoly!
I have a 1.4gig AYHJA chip(non-"Y") and its running at 1600 air cooled. I haven't tried for high cause I figure unless I get another 200mhz(which I won't) it won't be worth it.