Discussions and help regarding overclocking, motherboards, peripherals, AMD and INTEL CPU's
NascarFool
Posts: 3263 Joined: Thu Nov 23, 2000 1:21 pm
Post
by NascarFool » Thu Dec 13, 2001 9:17 am
Normally I have my bird flying at 10x149, so last night I changed the multiplier to 11 and the FSB to 140. It ran all night with F@H without any problems. SiSoft shows the bird at 1.55GHz.
Specs:
Asus A7A266
T-bird 1.33@1.55
400w PS
512megsPC2100
VidmanII
Posts: 2465 Joined: Wed Nov 22, 2000 9:54 pm
Location: Egg Harbor, NJ
Post
by VidmanII » Thu Dec 13, 2001 9:50 am
Did you notice any major increase in your temps? Nonetheless, if it ran F@h all nite, you should be good to go.
Nice work.
AMD Ph II X4 955 BE 3.2 @ 3.8 GHz | Scythe SCSMZ-2000 | ASRock 880GMH/USB3 | 8 GB G.Skill DDR3 1600 | Radeon HD5670 | Kingston 128GB SSD
NascarFool
Posts: 3263 Joined: Thu Nov 23, 2000 1:21 pm
Post
by NascarFool » Thu Dec 13, 2001 2:38 pm
Right now it is running at 11x140 @ 1.8v. Temps seem to be the same.
System temp: 19ºC/66ºF
CPU temp: 42ºC/107ºF
Keep in mind that I have a 4" flex duct over the side case fan bringing in cold air from outside. It's about 32ºF outside now.
VidmanII
Posts: 2465 Joined: Wed Nov 22, 2000 9:54 pm
Location: Egg Harbor, NJ
Post
by VidmanII » Thu Dec 13, 2001 5:26 pm
haha. I like ur style.
AMD Ph II X4 955 BE 3.2 @ 3.8 GHz | Scythe SCSMZ-2000 | ASRock 880GMH/USB3 | 8 GB G.Skill DDR3 1600 | Radeon HD5670 | Kingston 128GB SSD