I've tried it all with this BIOS, it has EVERYTHING but I cant get my
DUAL P3-667's above 770mhz. SMP causing this because maybe CPU1 needs more voltage
than CPU0? Maybe but there is no way for me to change it. I run them at 1.7v but I've
tried 1.65-1.8volts trying to see if i can get over the 152mhz FSB. It will go up to 200mhz
but Win2k will crash anything over 152@770mhz. I have Micron 256mb PC2100 DDR memory
and have tried all of the timing settings and CLS settings (3 or 2). But damn If i crank memory
memory this DDR flies! It even beat Rambus in SiSofts markings with a 150mhz FSB/2/and
timing at the max setting, over 600meg/sec approximately. Any have ideas? I've tried lowering
the AGP bus even but nothing works. Any advice, im geting two P3-800's which I should have
better luck with, these 133 based procs are killing me and I think thats why.
Velicos
2x P3-667@750mhz\1.7v with Alpha PAL's with noisy but sweet Deltas (max 35c each)
256mb Micron PC2100 DDR Memory
2x 20gig DiamondMax60 Maxtor HDs ATA100 7200rpm
ASUS 7700 GTS2 32mb DDR PURE
Hercules Game Theatre XP with Klipsch Promedia v2.400
Win2k SP2
Tribes2 and Anarchy Online B4 =)
Tampabay RR with Linksys 10/100 nic