Page 2 of 2

Re: Hardship: Shipbreaker

Posted: Thu Jan 28, 2021 9:36 pm
by Losbot
Bummer. I don't want to lose my progress!

Re: Hardship: Shipbreaker

Posted: Sat Jan 30, 2021 2:11 pm
by FlyingPenguin
I decided to play the weekly R.A.C.E. challenge. That's fun, once you know your way around these ships. You need to satisfy the work order, or as much as you can, in one 15 minute shift, and then your score is placed on the leaderboard.

You can replay it as many times as you like. You get the same ship with the same layout until a new challenge starts the next week.

Makes you cut corners. No time for careful, delicate cuts. Hack and slash through the bulkheads as fast and safely as you can, to grab the work order items.

Re: Hardship: Shipbreaker

Posted: Thu May 06, 2021 9:10 am
by FlyingPenguin
New progression reset starts today!

The 'Salvage Your Future' update also tweaks progression, adds more ship variety, and reworks difficulty:
https://www.pcgamer.com/hardspace-shipbreake ... ming-may-6

Re: Hardship: Shipbreaker

Posted: Sat May 08, 2021 2:59 pm
by Losbot
Did we lose our "equipment" ? I have no upgrade options now on my new profile or do they unlock later on?

Re: Hardship: Shipbreaker

Posted: Sat May 08, 2021 8:50 pm
by FlyingPenguin
It's a total reset. The new changes don't support the old saved game system. You start all over again.

Re: Hardship: Shipbreaker

Posted: Mon May 10, 2021 8:18 am
by Losbot
Entire Javelin cargo ship eaten by the processor off of one decompressing airlock

[url]https://www.reddit.com/r/Shipbreaker/comment ... processor/[/url]

Re: Hardship: Shipbreaker

Posted: Mon May 10, 2021 8:59 am
by FlyingPenguin
Heh, I did that with one of the really huge ships once. Framerate went down to nothing for a 15 seconds as the game figured out how to deal with that.

Re: Hardship: Shipbreaker

Posted: Thu May 26, 2022 8:07 am
by FlyingPenguin
FYI: Final game has been released with a complete campaign story.

Re: Hardship: Shipbreaker

Posted: Thu May 26, 2022 10:41 am
by Losbot
Oh, nice. I'll have to check it out. Haven't played in some time.

Re: Hardship: Shipbreaker

Posted: Sun May 29, 2022 9:24 am
by FlyingPenguin
There are two major career modes:

Standard which is a 15 minute shift, and limited oxygen. You are forced to go inside and sleep after the shift.

I personally, prefer Open Shift. No timer, so you can work on the ship as long as you want without being on a clock. I just find it annoying to be interrupted every 15 minutes. It really doesn't give you any advantage. I just prefer to work as long as I want without interruptions (short of flying back to the platform for more tethers, or to repair a cracked faceplate). You can do that in sandbox mode too, but then there's no progression or challenge. I want the career campaign, but the short shifts are annoying. This was a big complaint in the alpha and the devs added this option, and it's great that they listened to the community.

Open Shift also gives you the option (every time you go outside you have a choice), to disable oxygen use. This does remove one risk factor, but having played a lot of the pre release, I'm done with that. It's a bit annoying now, and I just want to work on the ship without having to constantly go to the platform to get more oxygen. There's plenty of other things that can kill you.

The game is by far the best simulation I've ever seen of flying around in zero G in a space suit. It takes inertia into account. Initially it's a bit difficult pushing the bigger heavy objects into the maws of the furnace or recycler, but once you get the tethers at around the time you work on your third ship I think, it's a whole new game. Click a tether to an object, click the other end to the maw. If it's really heavy you may need more tethers. It may need a shove if it gets hung up on something. Keep inertia in mind. Heavy things tend to want to keep moving at their initial vector.

The ships may seem to start out pretty simple, but that's just to let you learn the ropes. As your hazard rating increases, you get much more complicated ships, and you have to plan your salvage. If the ship is pressurized, you need to purge the atmosphere from all sections before you start cutting or you'll have an explosive decompression. If there's still fuel in the system, you need to purge it before cutting fuel lines or removing certain components. Your welding sparks are directional and can set things on fire. The ship might be fully powered up, and it's better to kill the power or risk electrical arcs. Reactors go critical and explode when freed from their mounts and the cooling system, so you need to cut open a clear path for it to take to the recycling barge so you can send it there before it goes boom.

It's a very Zen game. I played around 4 hours last night.

Re: Hardship: Shipbreaker

Posted: Sun May 29, 2022 9:33 am
by FlyingPenguin
Some new gameplay video here.

I like the Firefly style music. Hasn't got annoying enough yet to turn it off.


Re: Hardship: Shipbreaker

Posted: Mon May 30, 2022 11:14 am
by Losbot
Wish they had a co-op option, so you really need someone you can trust to not be an idiot. LOL