Page 1 of 1
Memory Question
Posted: Mon Jan 21, 2008 4:22 pm
by Err
I'm running my memory at the manufacturer's recommended timings of 4 4 4 12. I noticed yesterday that the memory is rated for 2.2V but the bios is setting it for 1.85 (Auto). I haven't had any stability problems so far. However, I was wondering if I should turn up the voltage to the manufacturer's recommended or leave well enough alone.
Posted: Mon Jan 21, 2008 6:47 pm
by MegaVectra
If it ain't broke don't fix it.
Posted: Mon Jan 21, 2008 7:07 pm
by FlyingPenguin
Agreed. Run MEMTEST86+ all night. If it's rock stable, leave it be.
Posted: Mon Jan 21, 2008 7:38 pm
by Err
Thanks guys!
Posted: Mon Jan 21, 2008 9:20 pm
by Executioner
Yeah I had the same issue with my new memory. The mfg recommends 2.1v but I left it at auto with the speed set to 800MHz even though I'm suppose to run it at 1066MHz with 2.1v. It passes memtest at the current setting.