Page 1 of 1
How high is your Barton Overclocks ?
Posted: Wed Feb 11, 2004 9:52 am
by smb
Anyone getting past 210 fsb ? I'm sitting at 215 or was, I had to cut it back because my chipset heatsink was getting too hot. I'm using a Alpha 8045 with an Aerocool Fan.
Specs:
Chaintech 7NJL1 (summit version, aka missing the goodies motherboard)
Barton 2500+ ( I don't know the version or stepping yet)
1gig PNY 3500 DDR
Radeon 9500 Pro
80g Seagate
Posted: Wed Feb 11, 2004 10:56 am
by NascarFool
XP3000+ @ 12x200
Specs:
DFI NFII Ultra Infinity
2x512PC3200 Buffalo Tech CH-5
Radeon AIW 9700 Pro
2x38.7GB Raptors in RAID0
Posted: Wed Feb 11, 2004 12:06 pm
by wvjohn
i've never really wound mine out b/c i have quiet cooling - i get 2.2 ghz with minimal tweaks
Posted: Wed Feb 11, 2004 12:42 pm
by dadx2mj
I have my 2500@2250MHz my PC2700 is holding me back . Running at 12.5x180
Posted: Wed Feb 11, 2004 1:03 pm
by VidmanII
11*210 (2.32 GHz )
** back to 11x210, got an error after 7 hours of prime95 with this 9800pro. Seems it doesn't like the higher PCI bus ( no pci/agp lock on KT600's )
No biggie. Just gonna OC the heck out of the 9800pro .
Came w/ 2.8ns Hynix DDR and I've got 8 ram sinks on the memory chips, so that's all good.
Posted: Wed Feb 11, 2004 5:58 pm
by buddhazen
i have a barton on an a7n8x
at 11 x 200 (1.65 but cpu-z says 1.71)
2,2,2,5(2.5v) hyperx 3200
and another barton on an ak97-d(aopen mobo)
190 x11.5 (default core)
2,3,3,7(2.7v) hyperx 3000
and an xp1700 at 175x12.5
768 pc 2700
2.5,3,3,7
none of my stuff passes prime but who cares
its works for me and i dont feel like bumpin voltages because my temps suck
Posted: Sat Feb 14, 2004 3:54 am
by sethpa
Barton 2500, 11 x 200 1.7V HyperX PC3500, ABit NF7-S