Page 1 of 1
swapped mboards...now nic doesnt work...
Posted: Tue Sep 30, 2003 11:55 pm
by nexus_7
welt from a kt266a board to that kv7 kt600 board I reviewed. The old one I was using an intel nic. and now I was hoping to use the onboard...but I cant get it to work. I removed the old drivers, and hardware...Now whats the deal?
This is win2k btw.
HELP!!!
Greg
Check
Posted: Tue Sep 30, 2003 11:59 pm
by eGoCeNTRoNiX
The bios.. And make sure it's enabled.. GL eGo
Posted: Wed Oct 01, 2003 12:02 am
by nexus_7
done that. It showes up in windows manager and is "working fine". I has to be a setting somewhere I would assume.
Greg
Posted: Wed Oct 01, 2003 10:00 am
by nexus_7
Put the same NIC back in...and its a NO go! HELP!
Greg
Posted: Wed Oct 01, 2003 2:36 pm
by chottoED
upgrade to xp
I know you said
Posted: Wed Oct 01, 2003 2:42 pm
by eGoCeNTRoNiX
You removed the old drivers and old hardware, but have you tried removing the current drivers for the onboard as well? I know this may be redundant.. Also, sometimes if the mobo has an option for onboard modem and it's enabled I have seen that cause problems.. Tried different slots with the hardware nic? GL and hope you get it soon.. eGo
Posted: Wed Oct 01, 2003 2:55 pm
by nexus_7
I removed every damn thing in the device manager.
but alass it didnt help.
I hate XP.
Greg
Posted: Wed Oct 01, 2003 3:17 pm
by nexus_7
reset the router...that worked...after the third time. ARG!
Greg
Re: swapped mboards...now nic doesnt work...
Posted: Fri Oct 10, 2003 6:47 pm
by VidmanII
Originally posted by nexus_7
welt from a kt266a board to that kv7 kt600 board I reviewed. The old one I was using an intel nic. and now I was hoping to use the onboard...but I cant get it to work. I removed the old drivers, and hardware...Now whats the deal?
This is win2k btw.
HELP!!!
Greg
upgrade to XP and nforce2.
read the router manual. :laugh