Page 1 of 1
Audio/AIW 9700 Pro question
Posted: Thu Mar 13, 2003 9:32 pm
by NascarFool
Just got the Logitech Z-640 5.1 speaker set and it connects to the three jacks of the onboard sound. I have an 8RDA+ with 6CH sound. The speakers use Line Out is for the front , Line In for rear and Mic for center. My AIW requires an audio cable from itself to Line In for the TV in portion of the AIW for audio in TV/Cable watching. How do I come up with an audio connection for it without losing any speaker connections ?
Posted: Thu Mar 13, 2003 9:36 pm
by blade
You need a "Y" adapter found at radio shack.
Posted: Thu Mar 13, 2003 9:49 pm
by NascarFool
*Edit*
Line in is used as a line out with the 6 Channel sound enabled. Can't use it for a line in and line out at the same time.
**Edit #2**
The AIW has a small 4 pin audio connector on the PCB. I used a CD Audio cable to connect it to the "AUX IN" on the motherboard. Works like a champ ! ! This AIW 9700 Pro is awesome !
Posted: Thu Mar 13, 2003 10:17 pm
by blade
Doh. Sorry, I didn't read that fully enough.
*I see ya got it worked out.
