Page 1 of 1
Slim 80mm fan, under 27dba, where at?
Posted: Wed Feb 06, 2002 4:58 pm
by Sean
I need one for behind my motherboard tray. I have a feeling if I did this, I would only be getting about 20cfm, which wouldn't be much of anything. But is this possible? I would be interested.
BTW: 15mm height or smaller..
Posted: Wed Feb 06, 2002 5:02 pm
by nexus_7
well the link at the bottom of this page sells a few. KDC that is. becides there quite a few places listed here do aswell.
http://www.pcabusers.com/links.php
Greg
Posted: Wed Feb 06, 2002 5:25 pm
by Sean
Well, nexus, I have looked at many stores, can't find a quiet, slim 60mm. Looks like I'll have to use a 80mm like you.
Know any slim 80mm's? (if I did an 80mm, then I could put a 92mm hole in my mobo tray, right?)
Posted: Wed Feb 06, 2002 5:47 pm
by nexus_7
i put a 120mm but yea a 92 should work just fine. I got mine off someone in the forums. its a panaflow. not the quietest in the world but its one of the very few slip 80mm fans. probably find it on pricewatch or yahoo shopping. model: FBA08T12H Hope this helps some. this joint has 2 for sale
http://www.markhannahsurplus.com/fanblow.php they are used...but as long as they work who cares. mine came with Bare leads so I had 2 attach the plugs my self.
Greg
Posted: Wed Feb 06, 2002 5:52 pm
by Sean
Thanks! That's a slim right? Or can you fit a 25mm thick one in there? (That's on the 830, right?).
Edit: Just checked, it's a slim. You have the high one, I think I may try and find the low one. Thanks for the model #, should really help!
Posted: Wed Feb 06, 2002 5:56 pm
by nexus_7
no way a normal 25mm one will fit. yea. I think these are 10mm maby 15. what I did was use normal screws and ram them all the way threw the fan holes then used a nut on the other end and tightned them down really good. put a rubber washer between the fan and the case aswell to reduse vibrations. then just cut the end of the screws off so nothing was sticking out further then the nut.
how loud does it say it is?
Greg
Posted: Wed Feb 06, 2002 6:11 pm
by Sean
The sound for your is 34db, the low is 23.
And man, the only place with these slims are the authorized resellers, that require a minimum of like a $200 purchase..:-\
Posted: Wed Feb 06, 2002 6:15 pm
by nexus_7
do a search on google with just the model # that usually has a few pop up...unless U did this already.
Greg
Posted: Wed Feb 06, 2002 6:23 pm
by Sean
I ALWAYS go to google. Came up with 8-10 links. Most just sites that don't let you order. ;-\ I am looking at all the for sale forums now.
Posted: Thu Feb 07, 2002 7:50 am
by poop
Try an electronics supply house. Mouser, Newark, and digi-key probably have what you need.
I just checked my handy digi-key catalogue, and they have what you need:
Panaflo 80mmx15mm fan, 21.5 dB-A, 21.9 CFM, for 12.50 The part number is P9732-ND
Posted: Thu Feb 07, 2002 7:53 am
by Sean
Yeah, I tried there, but they require a $25 min. purchase..
Posted: Thu Feb 07, 2002 7:56 am
by poop
Then buy 2
Posted: Thu Feb 07, 2002 11:37 am
by nexus_7
yea...buy me one. does it come with a plug or do we have to do that our selves? but for real pick me up one.
Greg
Posted: Thu Feb 07, 2002 2:20 pm
by poop
I am guessing it only has bare leads. Bare leads are pretty easy to splice onto a 4 pin molex connector, though.
Posted: Thu Feb 07, 2002 6:02 pm
by Sean
Ahh, Nexus, if you want one, you should buy. I have to pay a 6.5% sales tax!! Dang! LOL They charge 12.50 for one too, but would you want the low version, or the high? The high is available here:
https://www.jameco.com/cgi-bin/ncommerc ... 501&ctgys=
But no low. If it is easy to slow down a low..(I COULD use my bay bus I am getting..hmmm) then I would get a high.
Tell me what ya think!
