The ARMS Race.
Originally posted by smb
I'm at 2415 (10.5 x 230) 2415. I'm using the street bios you recommended. I guess I will let it sit there for a while, before moving higher.
Heck with that.
.Billygoat and I are here right now messing around w/ a couple xpm24's. Yours will do 11x 230 like nuthin' . Give it 1.8 or 1.825v in the BIOS and you shouldn't have any prob with that multi and fsb.
AMD Ph II X4 955 BE 3.2 @ 3.8 GHz | Scythe SCSMZ-2000 | ASRock 880GMH/USB3 | 8 GB G.Skill DDR3 1600 | Radeon HD5670 | Kingston 128GB SSD
nice sal
Last nite at vids house I had my rig up to 11.5 x 210 for 2415 on some ch-5 he had
1.725- cas 2 tite timings- ran beautifully- try for 12 x 213 (2556) @ 1.75 and made it into windows- but 3dmark was locking and I didnt want to push any more voltage threw in without a better HS
Its good to know that my ship will break 2400- 2450 at a high fsb with low voltage
When I get my bh-5 210 x 11.5 will be a good starting point if I can run 11 or 11.5 x 220 I will be grinning from ear to ear
Last nite at vids house I had my rig up to 11.5 x 210 for 2415 on some ch-5 he had
1.725- cas 2 tite timings- ran beautifully- try for 12 x 213 (2556) @ 1.75 and made it into windows- but 3dmark was locking and I didnt want to push any more voltage threw in without a better HS
Its good to know that my ship will break 2400- 2450 at a high fsb with low voltage
When I get my bh-5 210 x 11.5 will be a good starting point if I can run 11 or 11.5 x 220 I will be grinning from ear to ear
[align=center]<img src="http://www.statgfx.com/statgfx/folding/?&username=Billygoat(pcabusers)&border=0,255,0&label=255,0,0&header=0,0,255&stats=0,0,0&bgcolor=255,255,0&trans=no&template=fah_original&.jpg" alt="PCA Folding Rules!" />[/align]
Originally posted by smb
Final adjustments up to 2.5G, 1.75v and cas at auto. Not bad for a $106.00 processor.
Sal
![:]](./images/smilies/ha.gif){kind=small}
Sweeet !! How can ya beat that? These chips are a steal.Had a nice time at the house last nite w/ Billy goat messin' around with a couple xpm24's and my xpm26. Just for laughs we notched up my 26 to 11x243/ 1.85v (2.673 GHz or some ungodly #, I can't remember ) and it ran windows great but puked hard when "treated" to some 3Dmark. :laugh
Bill's got a nice 24 too. ran great with the good CH-5. His does 2.4 GHz easy as does this 24 I have here for a guy's build I'm doing. forgot to try it with the BH-5 I have in my rig. I think we were tired as he got here kinda late.
Nonetheless, what's more fun that swappin' OCin' war stories and just sittin' around in a room full of PC stuff??
.......and whippin' it into shape ! 
hipAMD Ph II X4 955 BE 3.2 @ 3.8 GHz | Scythe SCSMZ-2000 | ASRock 880GMH/USB3 | 8 GB G.Skill DDR3 1600 | Radeon HD5670 | Kingston 128GB SSD
I'm using a Vantec VAN-520A 520W as shown here......
http://www.newegg.com/app/ViewProductDe ... 473&depa=0
Another good PSU is Fortron Source 530W which is a bit less expensive.
http://www.newegg.com/app/ViewProductDe ... 968&depa=0
http://www.newegg.com/app/ViewProductDe ... 473&depa=0
Another good PSU is Fortron Source 530W which is a bit less expensive.
http://www.newegg.com/app/ViewProductDe ... 968&depa=0
AMD Ph II X4 955 BE 3.2 @ 3.8 GHz | Scythe SCSMZ-2000 | ASRock 880GMH/USB3 | 8 GB G.Skill DDR3 1600 | Radeon HD5670 | Kingston 128GB SSD
Ive noticed my 12 volt rails seem a bit off as well with the DFI, but when I take measurements with my multimeter at the mosfets and molex's all is good-
425 watt enermax here
425 watt enermax here
[align=center]<img src="http://www.statgfx.com/statgfx/folding/?&username=Billygoat(pcabusers)&border=0,255,0&label=255,0,0&header=0,0,255&stats=0,0,0&bgcolor=255,255,0&trans=no&template=fah_original&.jpg" alt="PCA Folding Rules!" />[/align]