Problem with system, need help

sabwafare2001 · Post by **sabwafare2001** » Sun Sep 22, 2002 11:48 am

The problem is when I start up my computer and the first screen where it shows the memory, cpu, and etc. it says Check System Health. It usually says System Health OK!. It starts and cuts off as normal and it has not crash. The only thing I have thing as memory: generic pc2100 to kingston pc2700 and a new hsf: Dragon Orb to Volcano 7+. I am overclocking it to 143fsb also.

gigabyte GA-7VRXP
XP1800+
Kingston pc2700
IBM 80gig 7200 and Fugitsu 20gig 5400
Lite-on 24x10x40
lite-on 16x dvd
creative blaster 56k V.92 modem
ATI 8500LE 64mb
600W powmax psu

dadx2mj · Post by **dadx2mj** » Sun Sep 22, 2002 11:56 am

I dont understand what your problem actually is. Can you clarify it a little bit?

sabwafare2001 · Post by **sabwafare2001** » Sun Sep 22, 2002 12:01 pm

It sayS CHECK SYSTEM HEALTH on the first screen when it usually says SYSTEM HEALTH OK

dadx2mj · Post by **dadx2mj** » Sun Sep 22, 2002 12:56 pm

Check your temps and make sure they are ok. If they are I would pull the new ram and see if the problem goes away. Then at least you would have it somewhat isolated.

Post by **FlyingPenguin** » Sun Sep 22, 2002 7:29 pm

"System Health " is usually what the BIOS menu that displays temps and voltages is called. I agree with Dad though - go into the BIOS menu and check all your temps and your voltages.