PROCESSORS
462 pin Socket A supports the AMD® K7 processors
Full series of Athlon/Duron CPU including the future Athlon processors
CHIPSET
ALi® Magic 1645(NB) & Magic 1535D+(SB) Chipset
Support AGP 2.0 specification (4X)
Support PCI 2.2 Specification
LPC I/O - IT8870F
SAN: RealTek 8139C
AC97 Audio Codec
Compliant with AC97 2.1 specification
SYSTEM BIOS
2 DDR DIMM Sockets and 2 DIMM sockets support (can not be used simultaneously)
Two 184-pin 2.5V DDR SDRAM (DDR266/DDR200) or
Two 168-pin 3.3V SDRAM (PC133/PC100)
Maximum: 2GB
MEMORY
AMI 2Mb Flash EEPROM
Supports Plug and Play 1.0A, AMP 1.2, Multi Boot, DMI
Support for ACPI revision 1.0 specification
I/O INTERFACE
Supports Plug and Play function
PS/2 keyboard and PS/2 mouse connectors
Two USB Ports
One - EPP/ECP mode parallel port
Two - 16550 high-speed serial I/O port
Audio Ports (Line-in, Line-out, Mic-in, CD-in and game port)
LAN Header
Supports 360K~2.88M Byte, 3 Mode FDDs
Dual PCI IDE interfaces - support four IDE devices (PIO mode 4, DMA Mode 2, Ultra DMA 33/66/100)
ATX Power Supply Connector
Ports, Headers and Others:
IrDA Cable header
Two Extra USB Headers Onboard
Front Panel MIC/Line-Out header
Green, HDD, Power indicator LED headers
CPU and Case Fan headers
LAN Card Wake Up / Internal Modem Ring Wake-Up headers
RTC & BATTERY
M1535D+ included 256 bytes of CMOS
With CMOS hardware clear jumper
EXPANSION SLOTS
4 PCI slots, 1 AGP slot, 1 AMR slot
FORM FACTOR
ATX (304mm*220mm)
WHAT I DID:
Updated the bios hoping to fix multiplier problems with the cpu...
New Bios version: 02/04/04
Link: http://www.ecs.com.tw/download/k7ama.htm
Problem:
I went through the setup exactly as follows at this link: http://www.ecs.com.tw/download/flash_ami.htm
My computer rebooted as part of step 3.
I have nothing after that...
Just a black screen and 1 short beep followed by two beeps shortly after...
thats it....
I can't do anything!!!
Anyone have any suggestions besides the obvious flash my cmos... take out my cmos battery?????
Help would be really nice
