Upgrade to 1.4 T-bird... Will my PSU handle it?

All things AMD. The best motherboards, COOLING setup, overclocking, how to, etc..
Post Reply
User avatar
TSDible
Goober Member
Posts: 19
Joined: Fri Jul 20, 2001 1:38 pm
Location: Jacksonville, AR (That's Arkansas)
Contact:

Upgrade to 1.4 T-bird... Will my PSU handle it?

Post by TSDible »

Hello all...

Just wanted some input. I'm thinking of upgrading to a 1.4 GHz T-Bird and I was wondering if I would also have to upgrade my PSU. A friend of mine told me that anything over a 1 GHz CPU "requires" a 2.03 compliant PSU. I hadn't heard this, so I turn to you.... :)

Here is the case/cpu that I currently have.

Addtronics 6896A Case
300W ATX PSU Model: CWT-300ATX

Can anyone lend some support?

Thanks in advance.
--Trust me, I know. I've been around people all my life.
blade
Posts: 9113
Joined: Wed Nov 22, 2000 1:56 am
Location: LV-426
Contact:

Post by blade »

I'd say it depends on the quality of the ps but I have a cheapy leadman 300w in my 1.4 setup and my brother has a deer 300w in his and both are doing just fine. Tried an addtronices 2.01 300w(same one as yours) and it worked fine too but I didn't use it for long. Not sure what the rating is on the leadman. Of course mileage may vary depending what all you have in your system.
User avatar
bigcfromcinci
Golden Member
Posts: 1793
Joined: Tue Nov 28, 2000 7:35 am
Location: Cincinnati,Ohio
Contact:

Post by bigcfromcinci »

I would say as long as it's on AMD's list of approved PS,you got no worries.I have several Enermaxs and a Antec303 and not had any problems.
Image
Image
User avatar
Kakarot
Golden Member
Posts: 1713
Joined: Wed Nov 22, 2000 8:26 am
Location: Chicago Land Area
Contact:

Post by Kakarot »

Just upgrade the CPU and try it... if its unstable then upgrade the PS too.. I think the worst that'll happen is it will work ok at 1.4ghz... but if you try to O/C it won't because it won't have enough juice to handle the higher strain.
"Why build only one when you can build two for twice the price?"
<a href="mailto:murphy@excaltech.com">Email</a>
<a target=NEW href="http://www.heatware.com/eval.php?id=377">Heatware evals</a>
User avatar
TSDible
Goober Member
Posts: 19
Joined: Fri Jul 20, 2001 1:38 pm
Location: Jacksonville, AR (That's Arkansas)
Contact:

Post by TSDible »

I did it...

It is rock solid with the current PSU.

Thanks to the advice of all.
--Trust me, I know. I've been around people all my life.
User avatar
Mike89
Senior Member
Posts: 457
Joined: Sat Nov 25, 2000 3:04 am
Location: California
Contact:

Post by Mike89 »

Yeah it seems AMD went a little overboard on the recommended power supplies. It states a 400 watt power supply for anything over 1.2 gig I think. I had an Antec 300 watt and after reading the recommended power supply list I went and bought the Antec 400 watt one just for peace of mind. Both my son and I have AMD 1.4 gigs. He is still running a 300 watt power supply. Both our machines are doing fine so it seems maybe I didn't really need to upgrade my power supply. But at least now I have bragging rights over my son! Heh heh.
Jethro Bodine
Genuine Member
Posts: 79
Joined: Sat Nov 25, 2000 9:16 am

Post by Jethro Bodine »

Those power supply requirements are a farce. I have a 250W in my Enlight case that's 2-3 years old and running my XP 1600+ fine.
User avatar
Buzz
Senior Member
Posts: 370
Joined: Wed Nov 22, 2000 4:36 am
Location: Tromsø, Norway

Post by Buzz »

Really Jethro Bodine ?? Guess my Fortron Source 300W will do then on my XP1600+ :)
User avatar
Bigal
Senior Member
Posts: 430
Joined: Tue Dec 18, 2001 9:00 pm
Location: Virginia, USA

Power Supplys Are Important....

Post by Bigal »

Jethro:

If you load up a system with all the goodies, such as zip drives, CD-RW drives, multiple hard drives, and especially lots of fans, then you can bet your hard earned money that a higher quality power supply (over the standard "250 Watt" or "300 Watt" power supplies that come with cases) will increase system stability. What we are really talking about here is the ability to hold a tight voltage regulation, and the ability to support the load under high current demands. Failure to do this might not be obvious to a normally-clocked system, but overclockers know that headroom in the power requirements is necessary to keep a system stable as the temperatures increase, or the tweaking levels increase. I found that my 1 GHz T-Bird system became much more stable once I replaced that Deer 300 Watt power supply that came with the full tower case. I found that out after going through numerous bios updates (on an Asus A7V) and playing around with so many fans that I lost count. My current power supply in that system came from STEP Thermodynamics (rated at 465 Watts) at a cost of $69. They appear to be out of the commercial business now, but the power supply lives on.

My new system, a custom modded mid-tower with a rheobus (for fan control) and a Kanie Hedgehog Type W heat sink, has an Enermax 431 Watt power supply ($119). I learned my lesson on the T-Bird system. Trust me, get a decent power supply if you are experiencing any stability issues. By the way, my new system isn't complete yet - I'm waiting for the Athlon XP 2000+ to arrive in January 2002. My mainboard (Soyo K7V Dragon Plus) and memory (Corsair 256 MB PC2400 CL2 DDR SDRAM) arrive this Thursday. I can't wait to get this baby completed, but on the other hand, I can't spend money like there's no tomorrow!
<color=red>Home web site: http://www.bigal-computers.net</color>

<color=blue>Like motorcycles? Check out the WORMS here: http://www.bigal-computers.net/worms.php</color>

Lots of hand-built and modded AMD systems.
rebel1864
Goober Member
Posts: 3
Joined: Thu Jan 10, 2002 5:52 pm
Location: at my house

1.4gig upgrade

Post by rebel1864 »

i was told to go with 350 to 400 ps on my 1.4 gig cpu .i'm running 300 now and 350 would be better i think. ;)
the south will rise again !
1.4 gig amd 266 fb t-bird
k7s5a board
384mb pc2100 ddr ram
readon7200 vc 64mb
wd 20 gb hd 7200 rpms
overclocking not needed!
grumpy 1
Senior Member
Posts: 118
Joined: Wed Nov 21, 2001 6:08 pm

hmmm

Post by grumpy 1 »

hows this then
i got 14 ghz tbird running at 1.53
asus a7v266 e
cd burner
dvd drive
2 hard drives
geforce3
sblive
230 watt power supply

Cheers
User avatar
chottoED
Almighty Member
Posts: 2340
Joined: Wed Nov 29, 2000 1:00 am
Location: Chicago
Contact:

Post by chottoED »

looks like you're running on luck...
230w for all that??... wow... have u monitored your voltage to see if you drop below 4.8v at full load?
<a href="http://folding.extremeoverclocking.com/user_summary.php?s=&u=38801" target=_blank><img src="http://home.comcast.net/~techgod723/pics/godaddy.gif"></a>
grumpy 1
Senior Member
Posts: 118
Joined: Wed Nov 21, 2001 6:08 pm

hehehe

Post by grumpy 1 »

i thought youd get a kick out of that im suprised it runs as well

I also think that the quality of the power supply is more important the the size alone
cheers
User avatar
Bimmer318i
Senior Member
Posts: 235
Joined: Tue Oct 16, 2001 5:48 pm
Location: Summerland, B.C./Calgary, AB, Canada
Contact:

Post by Bimmer318i »

umm, got 1.4 bird, kt7a-raid, 768 megs ram, 16x aopen dvd, plextor 12x10x32 cdrw, 2 x 45 gig 75GXP's, sb live x-gamer 5.1, AT! TV-wonder, d-link nic, visiontek g2 ti200, delta 68 cfm fan, 3 80mm case fans, cpu @ 1.85 volts @ 1470, been playin with it, Rock Solid (runs for months on end) on a YoungYear 300 watt psu, really should get somethin better though :) ..
My Heatware

Common Sense: A gift, not a granted
Post Reply