Page 1 of 1
Posted: Mon Apr 16, 2001 11:24 pm
by blade_146
I need this for an emachine I'm working on. Needs to be at least 120w and MICRO ATX ONLY. The fan is on the bottom and blows down on the cpu. These are somewhat smaller than a regular atx ps. I need one pronto
Posted: Mon Apr 16, 2001 11:36 pm
by DaveJ
If you can't find one here, check out
http://www.directron.com, they have them relatively cheap...
Dave
Posted: Mon Apr 16, 2001 11:38 pm
by blade_146
Yep I looked there a little while ago. I was hoping to find one cheaper but I might not.
Thanks Dave
Posted: Tue Apr 17, 2001 12:16 am
by sigel
i think I might be able to pull one for like $25 shipped.
Posted: Tue Apr 17, 2001 1:52 am
by cak
I have one, its the same size as a ATX PS but half the depth(fan on the inside on bottom). It's a 200watt unit.
Posted: Tue Apr 17, 2001 9:40 am
by blade_146
The exact dimensions need to be 4 7/8"(H) x 2 1/2"(W) x 4"(D). This thing is small. My old atx i have here won't even fit in the case of this emachine. If anybody has one like this I need it fast and really need to cross ship if your willing. LMK guys
Posted: Tue Apr 17, 2001 2:06 pm
by Msand9898
Hey blade I have a Dell Optiplex Gs+ 5166 that is ATX/AT Powered, will that work...
Its pretty small...
And its low wattage...
Posted: Tue Apr 17, 2001 2:12 pm
by blade_146
Can you check the dimensions for me? The websites I've looked at had "special" power supplies for emachines. I don't know if those are proprietary(sp) or not. It needs to look like this
http://caseoutlet.com/Ps/145W_mcroATX.jpg If yours will work how much you asking?
Posted: Tue Apr 17, 2001 2:16 pm
by Msand9898
Im headed home to meet the cable guy right now so I will check the PS while im there...
Posted: Tue Apr 17, 2001 2:18 pm
by blade_146
cool my man
Posted: Tue Apr 17, 2001 2:19 pm
by bighammer
and while you peeps are at it, Scott needs one also.
Posted: Tue Apr 17, 2001 4:22 pm
by Msand9898
Ok blade, went home and its a low profile ATX/ATR PS...
I can ship it out to you if it works you can have it...
just LMK...
Power:
DC power supply:
Wattage:
145 W (low-profile chassis)
Voltage:
90 to 135 V at 60 Hz
180 to 265 V at 50 Hz
Heat dissipation:
808 BTU (fully loaded low-profile system without monitor)
913 BTUs (fully loaded midsize system without monitor)
<IMG SRC="
http://www.mdhgifts.com/ps.gif"</IMG>
Posted: Tue Apr 17, 2001 4:52 pm
by blade_146
Does it have a fan on the bottom? cym too
Posted: Tue Apr 17, 2001 4:59 pm
by Msand9898
YGM again ...
Posted: Tue Apr 17, 2001 8:59 pm
by UpGrD
If you dont have what you need yet, check this out.
http://www.overstock.com/cgi-bin/d2.cgi ... D_ID=11646
Dont know if it will work for you.
EDIT!
Never mind, I just read the specs and it wont work!!!!!
Old tech!
[Edited by UpGrD on 04-17-2001 at 10:10 PM]
