PCA Forums

WANTED! To Trade for ONLY!:
HDD Coolers
Socket 7 CPU faster than 350MHz (I can offer my current K6-2 350MHz towards a faster cpu)
PC100/133 SDRAM - 64MB or larger preferred!
USB Game Controller
Wireless "G" NICs
Small keyboard LIKE THIS ONE! Willing to buy the KB too

I have FT:
SMC Barricade 7004BR (port 2 is bad, the other three work fine. Was in use till I upgraded to wireless)
Phoebe 8 port 10/100 Switch still in box
Linksys EFAH05W 5 port 10/100 hub
Generic 5 port hub (XZ840719T)
Microsoft Sidewinder Gamepad (Game port one)
IDE/Floppy Cables
Serial Port headers
2X CD-ROM for soundcard header
SIIG PCI Parallel Port Card
SIIG ISA Controller card with IDE, Floppy, Game, Parallel and Serial ports
Dlink ISA 10MBps Network Card
Two linksys PCI 10MBps Network Cards

AGP or PCI Video Card (Trident or WHATEVER is OK!)

i have a trident !~pci daytona 64t card if interested ?

I'll consider anything!

I have a Stealth 3D 3000 PCI video card, it even has the whole memory upgrade card to make it a supreme 4mb!

I believe I got a vid card on the way from bellringer

Originally posted by Gillbot
I believe I got a vid card on the way from bellringer

NOOOOOOO!!!!!!!!!!!!



I mean....

thats cool

I have a K6-2 400 & a few sticks of pc100 (2 64 and some 32s, maybe a 128 too)

I would be interested in the switch & the intellimouse, LMK

the intellimouse I can let go but the switch I need to keep until I get a replacement.

I have a 3Com 16-port network switch - rack mountable (I can post a model number when I get back home tommorrow). Would you consider trading it for the 5 port switch and the Intellimouse?

LMK

Originally posted by FlyingPenguin
I have a 3Com 16-port network switch - rack mountable (I can post a model number when I get back home tommorrow). Would you consider trading it for the 5 port switch and the Intellimouse?

LMK

Yes I would, got any more details? 10/100?

Yes, sorry, it's a 10/100, 12-port (not 16 - my bad) switch (not hub). Pulled from a client's office network because I upgraded him to a managed switch.

It does have a cooling fan - so you know - so it's not silent. Not that it's loud but some models don't have a fan and make no noise. It's also a rack mountable unit so it's 19 inches wide, 1 1/2 inches high. I don't have the rack mount ears for it though.

Model number is 3C16464A

I really don't have a need for something with this many ports - most of my clients have only 3 or 4 computers on their network, and I don't sell clients used equipment anyway.

If you're interested give me a day or two and I'll make sure all the ports are working.

Originally posted by FlyingPenguin
Yes, sorry, it's a 10/100, 12-port (not 16 - my bad) switch (not hub). Pulled from a client's office network because I upgraded him to a managed switch.

It does have a cooling fan - so you know - so it's not silent. Not that it's loud but some models don't have a fan and make no noise. It's also a rack mountable unit so it's 19 inches wide, 1 1/2 inches high. I don't have the rack mount ears for it though.

Model number is 3C16464A

I really don't have a need for something with this many ports - most of my clients have only 3 or 4 computers on their network, and I don't sell clients used equipment anyway.

If you're interested give me a day or two and I'll make sure all the ports are working.

Sounds good to me. My refs are at heatware under gillbot, yours?

I just tried to look up my Heatware and my account has been deleted. Don't know if it's from lack of use or what since I don't trade much (as I understand it though they're not supposed to delete it so I just emailed them to inquire what's going on).

However you can PM or email moderators Nexus_7 or Blade on this forum - they'll vouch for me. I'm also a moderator here.

I just got back home after 4 days out of town. Let me setup the router tomorrow and test it. I don't remember it having any bad ports but I'm not 100% certain.

You can email me at PCA@TheFlyingPenguin.com BTW

I'm sure anyone here will vouch for FP. He's one of the good guys.

I have 2 sticks of PC 100 128 mb.

I also have a 32 port 10/100 switch.

I really don't need anything, I want to setup a wireless network, but I'll be using my desktop to test it with, so I have no need for PCMIA cards(I think, the AP i am using might need one, not sure) so let me know.