WTB/FT/FS Package Deals and Price Dropss
Posted: Sat Jun 01, 2002 3:21 pm
Things I am looking for is
AMD motherboard and processor
AMD dualie motherboard with processors
Intel motherboard and processor
Large Size IDE Hard Drives.......80 GB and up
50 GB Seagate Barracudas 68 pin drives..........looking for more of these
DVDRAM Disks needed
Items For Sale
Water Cooling Madness
$70 dollars Takes all the rest of water cooling parts that are not sold or pending
$30 dollars Car Heater core measures 5 5/8 x 12 inchs tall. It has 3/8 barbed fittings on it. Two 120mm fans fit
$40 dollars 6 x 6 x 4 Plastic Resevior with Beckette 90 gph pond pump has 1/4 inch barbed fittings can easily be modified by person who buys this to 3/8s barbed fittings. Has relay switch already soldered on so that pump will turn on when computer starts up. This has never been used ***SOLD***
$30 dollars Used 4x4x6 Plastic Resevior with Beckets 90 gph pond pump has 1/4 inch barbed fittings can easily be modified by person who buys this to 3/8s barbed fittings. Has relay switch already soldered on so that pump will turn on when computer starts up.
$20 dollars New 4x4x6 Plastic Resevior with Beckets 45 gph pond pump has 1/4 inch barbed fittings doesnt have a relay switch for this one. Was to be used as a back up.
Your not seeing double. I decided to sell my other waterblock as well. I only used it for 2 weeks before my system quit
$35 dollars Maze 2 Spiral Block this one has the 1/2 inch barbed fittings which can easily be changed to 3/8's by the person who buys this. This block was used for 2 weeks then my computer quit. Uses the four holes for AMD motherboards . Includes mounting kit that goes with it
****Pending to mightyplatypus till next Tuesday******
_________________________________________________________
$35 dollars Maze 2 Spiral Block this one has the 1/2 inch barbed fittings which can easily be changed to 3/8's by the person who buys this. This block is practically brand new as I never got around to use it. Uses the four holes for AMD motherboards . Includes mounting kit that goes with. ***SOLD***
_________________________________________________________
Motherboards
$20 dollars Epox 8K7A motherboard ***Possibly SOLD***
[Has worked great till two days ago. Now only posts FF on boot up. Someone may be able fix this or ???]
CPU Socket Socket A (133/266 DDR MHz Support)
Chipset AMD 761
686B
Form Factor ATX
Multiplier Options 5.5 - 12.5x
Bus Speed Options 100-166 MHz
Voltages +0.1v - +0.4v in +0.1v increments
Memory Support 2 x 180-pin DDR SDRAM PC1600/PC2100 Support
Expansion Slots 6/0/1/0 (PCI/ISA/AGP/AMR)
AGP Support 4x AGP
USB Support 2x Standard USB ports
2x Expansion
Integrated Components AC'97 Audio
Bios Award Bios
Onboard IDE 2 x ATA100 EIDE
2 x ATA100/RAID IDE (optional)
$15 dollars Iwill VD133 GOLD motherboard this one is non working...... has onboard scsi
http://active-hardware.com/english/.../vd133-gold.htm
Memory
$55 dollars Corsair XMS2400 DDR 256MB
Powersupply
$48 dollars Enlight 400 watt powersupply [has a odor to this one]
Networking Cards
$35 dollars each Proxim Symphony Wireless PCI cards
http://www.pc-zubehoer-helbling.ch/...iresNeede1.html
I have a total of four of these cards which worked great for me when i had more computers in the house. Easy to use and no cables needed to make them work .
CDROM Drives
$18 dollars 24x Cyber CDROM IDE drive***Pending***
Hard Drives
For Trade Only 73 GB Seagate Cheetah 68 pin model [estimated trade value at 500 dollars]
#ST373405LW ..........factory refurbished has lots of warrantty left on it
For Trade Only IBM 45 GB 75 GXP ATA 100 7200 rpm IDE
Web Cam
$25 dollars US Robotics with PCI card that goes with it [all i can tell you about this is that it works. ]
FANS
$25 dollars Two NMB Aluminum 120 mm fans with 3 pin connectors. 103 CFM each
Car Stuff For Sale
Prices Dont Include Shipping on car parts
1) 1956 Dodge Divco converted into motorhome needs lots of work. New $300.00 radiator. Desoto spitfire engine with 4spd transmission. This a bread truck not a milk truck. It is about 20ft long over 6ft wide. Has some rustout around the edge of the top which I feel can be fixed. It has surface rust because it was in primer and is out in the weather.The doors on the side slide push in and slide back. The doors in the back have a double piano hinge to completely open and wrap around the side of the body. This is only one I have seen like this. The chassis is a 1ton Dodge truck . This is the only one I know of that exists . If I don't sale this by summer I will cut it up for scrap. The price is $600.00 dollars
2) I have one 291 Desoto Hemi engine(S22). The year is 1955. The engine needs to be rebuilt(Stuck). It is missing the exhaust manifolds only. It also doesn't have carb,dist,gen,bellhouseing. $290.00 dollars.
3) I have one 330 Desoto Hemi engine(S24) with 4 barrell intake.The year is 1956. The engine needs to rebuilt(Stuck). The engine is complete except for one valve cover and the exhaust manifold on the passenger side is broke. It also doesn't have carb,dist,gen,bellhouseing. .......375 dollars
4) A-body brake power booster. Valiant-Dart 1967 40 dollars
5) Six inch tube dropped front axle for streetrod . 150 dollars
6) Jaguar Coil overs ( Two only) . Need to be bead blasted and maybe rebuilt. 40 dollars
7) 8" ford rear end (50" wide pumpkin is centered) . This rearend was shortened to this size. I don't know if the axle I have will fit it. I also have two pumpkins to go with it . 150 dollars
8) Harley Davidson coil springs. Very good condition . 40 dollars
I want to thank everyone for thier help and support
Prefered payment is USPS money orders only
Multiple purchases will get a better deal
Prices are negotiable on most items
Please reply to AD when you send a Email
Emails Only
AMD motherboard and processor
AMD dualie motherboard with processors
Intel motherboard and processor
Large Size IDE Hard Drives.......80 GB and up
50 GB Seagate Barracudas 68 pin drives..........looking for more of these
DVDRAM Disks needed
Items For Sale
Water Cooling Madness
$70 dollars Takes all the rest of water cooling parts that are not sold or pending
$30 dollars Car Heater core measures 5 5/8 x 12 inchs tall. It has 3/8 barbed fittings on it. Two 120mm fans fit
$40 dollars 6 x 6 x 4 Plastic Resevior with Beckette 90 gph pond pump has 1/4 inch barbed fittings can easily be modified by person who buys this to 3/8s barbed fittings. Has relay switch already soldered on so that pump will turn on when computer starts up. This has never been used ***SOLD***
$30 dollars Used 4x4x6 Plastic Resevior with Beckets 90 gph pond pump has 1/4 inch barbed fittings can easily be modified by person who buys this to 3/8s barbed fittings. Has relay switch already soldered on so that pump will turn on when computer starts up.
$20 dollars New 4x4x6 Plastic Resevior with Beckets 45 gph pond pump has 1/4 inch barbed fittings doesnt have a relay switch for this one. Was to be used as a back up.
Your not seeing double. I decided to sell my other waterblock as well. I only used it for 2 weeks before my system quit
$35 dollars Maze 2 Spiral Block this one has the 1/2 inch barbed fittings which can easily be changed to 3/8's by the person who buys this. This block was used for 2 weeks then my computer quit. Uses the four holes for AMD motherboards . Includes mounting kit that goes with it
****Pending to mightyplatypus till next Tuesday******
_________________________________________________________
$35 dollars Maze 2 Spiral Block this one has the 1/2 inch barbed fittings which can easily be changed to 3/8's by the person who buys this. This block is practically brand new as I never got around to use it. Uses the four holes for AMD motherboards . Includes mounting kit that goes with. ***SOLD***
_________________________________________________________
Motherboards
$20 dollars Epox 8K7A motherboard ***Possibly SOLD***
[Has worked great till two days ago. Now only posts FF on boot up. Someone may be able fix this or ???]
CPU Socket Socket A (133/266 DDR MHz Support)
Chipset AMD 761
686B
Form Factor ATX
Multiplier Options 5.5 - 12.5x
Bus Speed Options 100-166 MHz
Voltages +0.1v - +0.4v in +0.1v increments
Memory Support 2 x 180-pin DDR SDRAM PC1600/PC2100 Support
Expansion Slots 6/0/1/0 (PCI/ISA/AGP/AMR)
AGP Support 4x AGP
USB Support 2x Standard USB ports
2x Expansion
Integrated Components AC'97 Audio
Bios Award Bios
Onboard IDE 2 x ATA100 EIDE
2 x ATA100/RAID IDE (optional)
$15 dollars Iwill VD133 GOLD motherboard this one is non working...... has onboard scsi
http://active-hardware.com/english/.../vd133-gold.htm
Memory
$55 dollars Corsair XMS2400 DDR 256MB
Powersupply
$48 dollars Enlight 400 watt powersupply [has a odor to this one]
Networking Cards
$35 dollars each Proxim Symphony Wireless PCI cards
http://www.pc-zubehoer-helbling.ch/...iresNeede1.html
I have a total of four of these cards which worked great for me when i had more computers in the house. Easy to use and no cables needed to make them work .
CDROM Drives
$18 dollars 24x Cyber CDROM IDE drive***Pending***
Hard Drives
For Trade Only 73 GB Seagate Cheetah 68 pin model [estimated trade value at 500 dollars]
#ST373405LW ..........factory refurbished has lots of warrantty left on it
For Trade Only IBM 45 GB 75 GXP ATA 100 7200 rpm IDE
Web Cam
$25 dollars US Robotics with PCI card that goes with it [all i can tell you about this is that it works. ]
FANS
$25 dollars Two NMB Aluminum 120 mm fans with 3 pin connectors. 103 CFM each
Car Stuff For Sale
Prices Dont Include Shipping on car parts
1) 1956 Dodge Divco converted into motorhome needs lots of work. New $300.00 radiator. Desoto spitfire engine with 4spd transmission. This a bread truck not a milk truck. It is about 20ft long over 6ft wide. Has some rustout around the edge of the top which I feel can be fixed. It has surface rust because it was in primer and is out in the weather.The doors on the side slide push in and slide back. The doors in the back have a double piano hinge to completely open and wrap around the side of the body. This is only one I have seen like this. The chassis is a 1ton Dodge truck . This is the only one I know of that exists . If I don't sale this by summer I will cut it up for scrap. The price is $600.00 dollars
2) I have one 291 Desoto Hemi engine(S22). The year is 1955. The engine needs to be rebuilt(Stuck). It is missing the exhaust manifolds only. It also doesn't have carb,dist,gen,bellhouseing. $290.00 dollars.
3) I have one 330 Desoto Hemi engine(S24) with 4 barrell intake.The year is 1956. The engine needs to rebuilt(Stuck). The engine is complete except for one valve cover and the exhaust manifold on the passenger side is broke. It also doesn't have carb,dist,gen,bellhouseing. .......375 dollars
4) A-body brake power booster. Valiant-Dart 1967 40 dollars
5) Six inch tube dropped front axle for streetrod . 150 dollars
6) Jaguar Coil overs ( Two only) . Need to be bead blasted and maybe rebuilt. 40 dollars
7) 8" ford rear end (50" wide pumpkin is centered) . This rearend was shortened to this size. I don't know if the axle I have will fit it. I also have two pumpkins to go with it . 150 dollars
8) Harley Davidson coil springs. Very good condition . 40 dollars
I want to thank everyone for thier help and support
Prefered payment is USPS money orders only
Multiple purchases will get a better deal
Prices are negotiable on most items
Please reply to AD when you send a Email
Emails Only
