FS/FT: CHEAP SCSI COMBO, dual slot 1, geforce2 mx
Posted: Thu Apr 25, 2002 1:07 pm
alrighty then, came across some more gear in the closet, thus I'm consolidating my threads:
First, a nice SCSI Setup:
1. 1 AHA-2940U2 OEM Controller
2. 1 Plextor 12/4/32 CDRW
3. 1 NEC 32x CDROM
4. 2 Compaq Model BD0186349B U160 SCSI Drives, 18Gb
The Controller is OEM and is capable of LVD 80mb/s. It has an a 50pin HD external, 50 pin Internal, 68 pin Ultra2 internal, and a 68 pin Ultra Wide internal connector.
The plextor, well, the name says it all. It has worked flawlessly for me and never made a coaster.
The NEC is a 32x, and works as well as any SCSI CDROM. I have used this combination with clonecd without problems. I was able to backup Safedisc2 CD's with limited success. Your milage will vary on this.
The two Compaqs are Ultra160 drives with a rotational speed of 10000RPM. These are pivate label drives made by Seagate.
I will not break this package up....
I'm not going to tell you how dependable this HDD setup has been for me or how little CPU overhead SCSI uses...you already know that.
With that said, my asking price will be 340.00 USD+shipping. <---CRAZY CHEAP
Things I have for trade are:
1. Dual Sot 1 Motherboard p2-300 to p3-500: Onboard LAN and SCSI(2940u2 equiv.) - System Pull from Dell Precision 410
2. Geforece2MX Vidcard 32mb - AGP
3. NewsPrinter20 - Sun B Laser Printer with sbus card, for SPARC only (local pickup Rochester, NY)
4. IBM 9.1gb LVD Drive 7200RPM OEM
Things I need are:
Socket A processor, no chipped cores please, T-birds or Duron
ATX case
IDE CDROM
I will only ship to the lower 48 states. Delievey Confirmation and Insurance will be supplied. The price is negotiable, but please no low balling or thread crapping. Either PM me or keep negative comments to yourself...thank you.
Heatware is under Need4speed.
I will only accept MO's
Be kind and gimme a "bump" when're done reading
First, a nice SCSI Setup:
1. 1 AHA-2940U2 OEM Controller
2. 1 Plextor 12/4/32 CDRW
3. 1 NEC 32x CDROM
4. 2 Compaq Model BD0186349B U160 SCSI Drives, 18Gb
The Controller is OEM and is capable of LVD 80mb/s. It has an a 50pin HD external, 50 pin Internal, 68 pin Ultra2 internal, and a 68 pin Ultra Wide internal connector.
The plextor, well, the name says it all. It has worked flawlessly for me and never made a coaster.
The NEC is a 32x, and works as well as any SCSI CDROM. I have used this combination with clonecd without problems. I was able to backup Safedisc2 CD's with limited success. Your milage will vary on this.
The two Compaqs are Ultra160 drives with a rotational speed of 10000RPM. These are pivate label drives made by Seagate.
I will not break this package up....
I'm not going to tell you how dependable this HDD setup has been for me or how little CPU overhead SCSI uses...you already know that.
With that said, my asking price will be 340.00 USD+shipping. <---CRAZY CHEAP
Things I have for trade are:
1. Dual Sot 1 Motherboard p2-300 to p3-500: Onboard LAN and SCSI(2940u2 equiv.) - System Pull from Dell Precision 410
2. Geforece2MX Vidcard 32mb - AGP
3. NewsPrinter20 - Sun B Laser Printer with sbus card, for SPARC only (local pickup Rochester, NY)
4. IBM 9.1gb LVD Drive 7200RPM OEM
Things I need are:
Socket A processor, no chipped cores please, T-birds or Duron
ATX case
IDE CDROM
I will only ship to the lower 48 states. Delievey Confirmation and Insurance will be supplied. The price is negotiable, but please no low balling or thread crapping. Either PM me or keep negative comments to yourself...thank you.
Heatware is under Need4speed.
I will only accept MO's
Be kind and gimme a "bump" when're done reading