PCA Forums

Hi, i'm through with this dealer thing...please help me get rid of these stuff....i have permission from blade.


ALL ORDERS WILL GET DISCOUNT 10% OFF printed price...i know 10 % might not sounds that big discount but that is A LOT cheaper than any other stores

I have stuffs for sale:

ALPHA PAL6035 $19.00 - ( 35 ) pieces
w/ SUNON $23.00
w/ YSTECH $24.00
w/ Delta $27.00
For more information: Alpha PAL6035

ALPHA PEP66 $21.00 - ( 15 ) pieces
w/ SUNON $26.00
w/ YSTECH $27.00
w/ Delta $29.00
For more information: Alpha PEP66

Kanie Hedgehog 238 $24.00 - FULL COPPER - ( 45 ) pieces
w/ Sunon $29.00
w/ YStech $30.00
w/ Delta $32.00
For more information: Hedgehog 238

Globalwin
FOP32-1 $16.00 - ( 16 ) pieces
For more information: FOP32-1

FOP38 $19.00 - ( 19 ) pieces
comes with fan guard and 3 to 4 pins connector
For more information: FOP38

WBK38 $20.00 - ( 27 ) pieces
comes with fan guard and 3 to 4 pins connector
For more information: WBK38

FAC08 $8.00 - ( 7 ) pieces
Chipset and Video Card cooler
For more information: FAC08

Fans ONLY
SUNON -- 4,500rpm, 23.5cfm and 34Dba -- $6.00 - ( 47 ) pieces
YSTECH -- 4,200rpm, 27.2cfm and 34.5Dba -- $7.00 ( 52 ) pieces
Delta -- 6,800rpm, 37.61cfm and 46.5Dba -- $9.00 ( 59 ) pieces

Grills Chrome
40mm -- $1.00 - ( 6 ) pieces
60mm -- $1.25 - ( 1 ) piece
80mm -- $1.25 - ( 4 ) pieces
92mm -- $1.50 - ( 6 ) pieces
120mm -- $1.50 - ( 5 ) pieces

Arctic Silver II 3gr Syringes -- $6.00 - ( 0 ) tubes -*- GONE -*-

All items are BRAND NEW in original box. The heatsinks do NOT come with grease or fan guard except where noted. The shipping cost would be $5.00 per package up to 2 heatsinks USPS Priority Mail w/ delivery confirmation. For less than 1 lbs stuff, there is first class shipping method for $2.00 per package. Other method of shipping is available, just let me know which method you prefer.

I have heatware eval under alfalfa79. I accept paypal, MO, and personal check. You can e-mail me at alfalfa79@hotmail.com or icq me at 4221665 to buy the heatsinks.

Bumps are greatly appreciated

ALfred

i'm looking for hard drive either:

Maxtor 20gb 5400 rpm ata100 32049H2

OR

Quantum Fireballp LM30 30bm 7200rpm ata/66

i'm also looking for

Pentium III/933 133mhz for my gateway 6400 server...i believe it has cco stepping -*- PENDING -*-

Let me know what u have. I will add cash to balance the trade if needed.

Thx

I'll take (1) 120mm chrome fan grille and ( 1) tube of AS II please. 1st class shipping would be fine. I'll try to ICQ you tonite after I get home from work.

up..

vidman...haven't receive ur e-mail yet...

Those hedgehogs, whats the max Mhz rating for em? I'm planning on building a dual athlonMP box,
and have a spare p3 933/133EB lying around. Lemme know.

i honestly don't know the exact mhz rating for the kanie...but i've used on thunderbird athlon 1.4ghz and work like a champs...

since athlon mp is based on palomino core which is runs cooler than regular thunderbird, i believe that the kanie will works great for the highest athlon xp that is available for now...

remember to slap some arctic silver in between to get the greatest possible performance..

Do you have any 120mm fans to go with the grills?

Hi, i have 1 USED 120mm fans and grill...it's a Panaflo Model FBA12G12M DC 12V 0.45 A

it's UNTAILED. you can have it for $8.00 shipped first class...let me know if you want it..

alfalfa,
I did some research on those Kanie's, and although they are slightly less efficient then my PAL6035's, they look a lot prettier.
How about I trade you my p3 933/133EB for 2 Hedgehog's w/Delta's, a FAC08 chipset cooler and a syringe of Arctic Silver2. Let me know what you think, all together it's about 78$, and the lowest price on pricewatch now for a p3 933/133EB is 118$ US.

JDP












ICQ: 14989572 Y!:jpavleck MSN: judg3@hotmail.com Email: jeremy(at)pavleck(dot)com

I think I'm going to pass on the fan, thanks anyway

ok i can trade you, p3 933/133EB for 2 Hedgehog's w/Delta's, a FAC08 chipset cooler and a syringe of Arctic Silver2 but...

Could u give me the s-code for the pIII and the stepping....because it will go as dual..i need to make sure that it will work w/ my current processor..is it retail or oem? u guarantee it won't be DOA, rite? do u have heatware? if you don't, then i need to have you send the processor first..you can find check my heatware under alfalfa79...

The SPEC on this OEM cpu is SL4C9, which Intel's P3 S-Spec page says is stepping cC0. Stepping 0 basically. And yes, I guarantee it not to be DOA - I pulled this off of a Compaq Proliant Photon 1U server, and it was only used for maybe a week tops, its in mint condition.
I just signed up for heatware, as I just found out about this forum and haven't done this much but I looked up you profile and I feel you wont screw me so I have no problems sending it out to you first. LMK

cym Alfred

ygm back vidmann...

judge c u pm...let me know ur e-mail also...

PIII/933 is now pending to judge...

still need hard drive though...